Miller Electric DS-64M Swingarc manual Teach Points, Teach Using 15 Points

SECTION 13 − TEACH POINTS

13-1. Teach Using 15 Points

Apk = Peak Amperage

Vpk = Peak Voltage

Abk = Background Amperage

PPS = Pulses Per Second

IPM / MPM PWms = Pulse Width (Milliseconds)

780 / 19.8

750 / 19.1

700 / 17.8

650 / 16.5

600 / 15.2

550 / 14.0

500 / 12.7

450 / 11.4
	Example Of A Synergic
400 / 10.2	Setting For 425 IPM With
	All Teach Points Set At 50

350 / 8.9 IPM (1.3 MPM) Increments

300	/ 7.6
250	/ 6.4
200	/ 5.1
150	/ 3.8
100	/ 2.5
50	/ 1.3

Apk	100	180	210	240	270	300	330	360	370	420	450	480	510	540	565	Apk
Vpk	10	18	21	24	27	30	33	36	37	42	45	48	51	54	56	Vpk
Abk	10	20	30	40	50	60	70	80	90	100	110	120	130	140	200	Abk
PPS	20	55	80	105	130	160	185	210	235	260	290	315	340	365	400	PPS
PWms	1				2			3			4				5	PWms

The teach mode allows the user to create custom pulse programs. The teach mode selection for 15 teach points gives a more defined curve for a specific range. At each teach point, the user can adjust five parame- ters to shape the pulse waveform of the weld output. The six parameters are: IPM (MPM), Apk, Vpk, Abk, PPS, and PWms.

Apk, Vpk, Abk, PPS, and PWms acting together provide the energy necessary to burn off welding wire at a set wire feed speed. The graph below shows that as wire feed speed increases, energy increases (Apk, Vpk, Abk, PPS, and PWms acting syn- ergically).

Under some conditions, the wire feeder lim- its wire feed speed to maintain all pulse pa- rameters within the capability of the system.

OM-1588 Page 33