Mitel 5320 manual Tag Call, To make a Speed Call, To tag a malicious call

5320 IP Phone – User Guide

Speed Call

Speed Call is an application that allows you to dial a specific number with one key press. You must program Speed Call on a Programmable key. For more information on programming this key, see Program Feature Keys Using the Settings Application.

To make a Speed Call:

∙Press the key that you have programmed as your Speed Call key.

∙

Tag Call

Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using the tag, your system administrator or Telephone Company can identify the source of the call and provide this information to appropriate personnel or authorities.

CAUTION: Tagging a non-malicious call may result in fines or other penalties.

To tag a malicious call:

1.Press the programmed Tag Call key while the call is in progress. For information on how to program keys, see to Programming Features On Your Keys

-OR-

Press (TRANS/CONF).

2.Dial the appropriate feature access code.

If the call was successfully tagged, Thank You is shown on the display; otherwise, Not Allowed is displayed.

Note: Tag Call can be used on active two-party calls only. Calls on hold and conference calls cannot be tagged.

- 49 -