Menu operation (continued)

IMAGE menu (continued)

ITEM

SETTING

FUNCTION

 

ADVANCED MENU

OK

 

 

 

 

The ADVANCED MENU is displayed for the following settings.

 

 

SCREEN SIZE

2 options

Select according to the screen size.

VERTICAL LOCATION

±26

 

 

 

Use to adjust the position (height) of the projected image.

CW SPEED

4x / 6x

Select the color wheel speed. 6x is effective only when a 1080p 24

 

 

 

 

 

 

signal is input.

FRAME RATE CONVERSION

OFF

A 96Hz driver provides four times in the input of 24P, realizing a speed

 

 

 

 

 

 

of film. This

mode is suitable for playing games as this mode does not

 

 

 

 

 

 

cause the image delay due to conversion.

 

TRUE FILM

Use to produce the sharp images, leaving frame-by-frame feeling

 

 

 

 

 

 

unique to films.

 

TRUE VIDEO

Use to reduce blurring of the moving images by interpolating the

 

 

 

 

 

 

video images.

F.R.C. LEVEL

1 - 5

 

 

Use to adjust the effect level of the motion interpolation for the frame

 

 

 

 

 

 

rate conversion.

BrilliantColor™

ON / OFF

Use to select whether or not to enable the BrilliantColor™.

NOISE REDUCTION

ON / OFF

Reduces noise of projected images when the input signal is noisy.

CTI

0 - 5

 

 

Use to correct smeared color boundaries.

HDMI INPUT

AUTO

The proper setting is automatically selected for HDMI input signal.

 

ENHANCED

Select this when solid black appears with AUTO selected for HDMI

 

 

 

 

 

 

input. (See page 16.)

 

NORMAL

Select this when grayish black appears with AUTO selected for HDMI

 

 

 

 

 

 

input. (See page 16.)

 

SUPERWHITE

Select this when solid white appears with AUTO selected for HDMI

 

 

 

 

 

 

input. (See page 16.)

SETUP

AUTO

Select AUTO for normal use. When LANGUAGE is not set to

 

 

 

 

 

 

and 480i, 480p or TV60 signal is input, the SETUP changes

 

 

 

 

 

 

to 7.5% automatically.

 

OFF

Select to make black lighter.

 

3.75% / 7.5%

Select to make black intense.

 

 

 

 

 

 

• When 7.5% is chosen, the brightness is decreased by the set-

 

 

 

 

 

 

up cancel function for the U.S. Choose OFF when the image is

 

 

 

 

 

 

dark.

 

COLOR MANAGEMENT

ON

 

/ OFF

Select ON

 

to change to any desired color by adjusting each of

 

 

 

 

 

 

 

 

GAIN, SATURATION and HUE of six different colors. (See page 39.)

COLOR SPACE

WIDE

The color space becomes wider than that of NORMAL and colors

 

 

 

 

 

 

appear natural.

 

NORMAL

The color space gets close to that of sRGB.

PICTURE MENU RESET

OK

 

 

Pressing the ENTER button resets the picture quality settings of the

 

 

 

 

 

 

 

selected picture mode to the factory defaults.

When FRAME RATE CONVERSION is set to other than OFF, the image may flicker at an instant when the menu is displayed.

While a 3D image is displayed, you cannot set SCREEN SIZE, CW SPEED, FRAME RATE CONVERSION, and F.R.C. LEVEL.

While a 2D image is displayed except for 24P, you cannot set CW SPEED.

EN-31

Page 31
Image 31
Mitsubishi Electronics HC7900DW Setting Function Advanced Menu, Screen Size, Vertical Location, CW Speed, Off, True Film