Preparing your projector

What’s included in the box

AC power cord*

for the U.S.

J2552-0063-03

Remote control

 

for Europe

J2552-0247-00

User Manual/Quick Start up (English only)

 

for the U.K.

J2552-0065-02

Safety Manual/Quick Start up

 

for Australia

J2552-0053-00

CD-ROM (with User Manual)

 

for South Korea

J2552-0247-00

Battery (2)

Computer cable

 

J2552-0072-05

Lens cap

Mini DIN 5-pin cable

 

02552-0388-00

Lamp replacement attachment

 

 

 

 

* One of power cords for the U.S., Europe, U.K., Australia, and South Korea is provided appropriately.

Important:

• The attached power cord is to be used exclusively for this product. Never use it for other products.

Inserting the batteries into the remote control

 

 

1.

Remove the back lid of the remote control.

1

3

2.

Check the polarity (+), (-) of the batteries, and set them

 

correctly, inserting their (-) side first.

 

 

 

• If the battery is inserted from the (+) side first,

 

 

 

inserting the (-) side is difficult because the coil spring

 

2

 

end hits on the battery side. If the battery is forced in

 

 

this way, the outer label of the battery may get ripped

 

 

 

and it may cause a short-circuit and heating.

 

 

3.

Attach the back lid.

 

 

Important:

 

 

Use two size-AA batteries (R6).

 

 

Replace the two batteries with new ones when the

 

 

 

remote control is slow to respond.

Removing the batteries from the remote control

Remove the back lid of the remote control and take out the batteries.

Caution:

Use of a battery of wrong type may cause explosion.

Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteries should be used.

Dispose of used batteries according to your local regulations.

Before you dispose of the batteries, insulate them by placing insulation tape on the positive (+) and negative (-) terminals. If you dispose of the batteries together with other conductive objects such as a metal piece, they may short out, resulting in fire or explosion.

Batteries may explode if misused. Do not recharge, disassemble, or heat the batteries, or put them into fire or water.

Be sure to handle the batteries according to the instructions.

Load the batteries with its positive (+) and negative (-) sides correctly oriented as indicated on the remote control.

Keep batteries out of reach of children and pets. If children swallow the battery, see a doctor immediately.

Remove the batteries, if the remote control is not used for a long time.

Do not combine a new battery with an old one.

If the solution of batteries comes in contact with your skin or clothes, rinse with water. If the solution comes in contact with your eyes, rinse them with water and then consult your doctor.

Do not carry or store the batteries together with metallic ballpoint pens, necklaces, coins, or hairpins. Otherwise, they may short out, causing explosion or liquid leakage and resulting in fire or injury.

Do not store the batteries where they are exposed to direct sunlight or subjected to high temperature and high humidity. High temperature and high humidity may cause corrosion or liquid leakage.

EN-6

Page 6
Image 6
Mitsubishi Electronics HC7900DW user manual Preparing your projector, What’s included in the box