Menu operation (continued)
INSTALLATION menu
| opt. |
|
INSTALLATION |
| |
| KEYSTONE | 0 |
| LAMP MODE | LOW |
| AUTO POWER | OFF |
| ON | |
|
| |
| AUTO POWER | OFF |
| OFF | |
|
| |
ON | SPLASH | ON |
| SCREEN | |
|
| |
| BACK COLOR | BLUE |
| IMAGE | OFF |
| REVERSE | |
|
| |
| TRIGGER1(POWER) | OFF |
| TRIGGER2(ANAMO) | OFF |
| TEST PATTERN | CROSS HATCH |
ITEM | SETTING | FUNCTION |
KEYSTONE | ±15 | Use to correct vertical keystone distortion. |
LAMP MODE | STANDARD | Select this option when you want to view images in a |
| LOW | Select to moderate the intensity of the lamp. The fan operating sound is |
|
| reduced and the lamp lifetime becomes longer. |
AUTO POWER ON | ON / OFF | When ON is chosen, the lamp is automatically lit when the power cord is |
|
| plugged in the wall outlet. Choose ON when using the projector mounted on |
|
| the ceiling. |
•The projector is in the
|
|
|
|
|
|
| remote control to turn on the lamp. |
AUTO POWER OFF | OFF / 5 - 60min | Use to set the time elapsed before the projector enters the | |||||
|
|
|
|
|
|
| when there is no signal input from the source. |
SPLASH SCREEN | ON / OFF | Choose ON to display the splash screen when the power is turned on. | |||||
BACK COLOR | BLUE / BLACK | Use to change the color of the screen that appears when no signal is | |||||
|
|
|
|
|
|
| supplied. |
IMAGE REVERSE | OFF | Select when viewing images from the front with the projector installed on | |||||
|
|
|
|
|
|
| the floor. |
| MIRROR | Select when viewing images projected from the behind of the screen with | |||||
|
|
|
|
|
|
| the projector installed on the floor. |
| INVERT | Select when viewing images projected from the behind of the screen with | |||||
|
|
|
|
|
|
| the projector installed on the ceiling. |
| MIRROR INVERT | Select when viewing images from the front with the projector installed on | |||||
|
|
|
|
|
|
| the ceiling. |
TRIGGER1(POWER) | ON / OFF | The trigger output signal (12 V) is output from the TRIGGER 1 terminal when | |||||
| ON / OFF | the lamp illuminates. | |||||
TRIGGER2(ANAMO) | The trigger output signal (12 V) is output from the TRIGGER 2 terminal when | ||||||
|
|
|
|
|
|
| the aspect ratio is set to ANAMORPHIC 1 or ANAMORPHIC 2. |
TEST PATTERN | CROSS HATCH |
| Select to show the test cross hatch pattern. | ||||
| |||||||
| WHITE |
|
|
|
| Select to show the maximum brightness image. | |
|
|
| |||||
| BLACK |
|
| Select to show the minimum brightness image. | |||
|
| ||||||
•When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about one minute after
•When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.
•Do not change the setting of LAMP MODE frequently.
•To cancel the test pattern, press any button.
•While a 3D image is displayed, you cannot set KEYSTONE.
