Mitsubishi Electronics MXZ-32SV Technical Changes, Part Names and Functions, Outdoor Unit

1

TECHNICAL CHANGES

MXZ-32RV - E1

➔MXZ-32SV - E1

1.The combination pattern of the indoor unit has increased.

2.Crankcase heater has disused.

3.Refrigerant circuit has changed.

•Disuse of 2-way valve.

•Disuse of capillary tube [3 o [2 o 500.

•Disuse of low pressure switch.

•Disuse of suction pipe temperature thermistor.

MXZ-32SV - E1

➔MXZ-32SV - E2

1.Combinations of the connectable indoor units have increased.

2.Noise filter P.C. board has changed to improve the capacity for protecting the inverter-controlled circuit when the voltage higher than the rated one is aupplied with the inverter-controlled circuit.

3.Noise filter P.C. board for “E1” and “E2” are not interchangeable.

4.Service parts have been changed as follows according to above change;

•The value of R(resistor)has changed. 10Ω ➔	20Ω
•TB6(terminal block) has been removed.

2

PART NAMES AND FUNCTIONS

OUTDOOR UNIT

MXZ-32SV- E1 MXZ-32SV- E2

Air inlet (back and side)

Model indication

Air outlet

2