Mitsubishi Electronics WD385U-EST user manual Menu items, Picture menu, Menu operation continued

Menu operation (continued)

Menu items

Set the following items provided in the respective menus.

Picture menu

	Picture
Image				Auto
Brightness					0
Contrast					0
Color Temp.				Mid
Color Management			Red
Aspect Ratio		Normal
Input Level				Auto
3D				Off
3D Sync Invert				Off

Adjust

Select

MENU Exit

ITEM	SETTING					FUNCTION
Image	Auto					Automatically sets an optimal color balance based on the input signal. Use
						this setting for most cases.
	Theater					Makes projected images soft and smooth. Best suited for movies.
	Presentation					Makes projected images bright and crisp.
	Standard					Makes projected images look natural.
	Black Board					Reproduces natural color tones when images are projected directly onto a
						black board.
	White Board					Reproduces natural color tones when images are projected directly onto a
						white board.
	User					Use to set Gamma or BrilliantColor™. (See page 31.)
Brightness	±30					Adjusts the brightness of projected images. (See page 30.)
Contrast	±30					Adjusts the contrast of projected images. (See page 30.)
Color Temp.	4 options					Adjusts the color temperature. (See page 30.)
Color Management	Red	/ Green			/	You can change to any desired color by adjusting each of Gain, Saturation
	Blue	/ Cyan		/		and Hue of six different colors. (See page 31.)
	Yellow		/ Magenta
Aspect Ratio	Normal					Automatically sets the aspect ratio in relative to the input signal. Use this
						setting for most cases.
	16:9					Select to expand squeezed (or horizontally compressed) images such as DVD
						images to 16:9.
						For XD365U-EST only:
						Press the ENTER button to select the image display position within the
						screen from Center, Upper, and Lower.
	Full					Select this setting when you want to project images in the full screen.
Input Level	Auto /					For HDMI signal input:
	Normal /					Auto:	The proper setting is automatically selected.
	Enhanced					Normal:	Select when grayish black occurs.
						Enhanced: Select when solid black occurs.
						(See page 13.)
3D	Off / On					Set to On/Off of 3D display.
3D Sync Invert	Off / On					Switches the order of the image for left eye and for right eye.

•When Image is switched, projected images may be distorted.

EN-22