Mitsubishi Electronics WD385U-EST Advanced display utilities continued, LAN Display, Connection

Advanced display utilities (continued)

LAN Display

You can project the computer images inputted via a wired or wireless LAN.

You can also perform the following during the LAN Display projection:

•4-to-1 split screen projection

Images from up to 4 computers can be projected split on 1 projector screen.

•Remote desktop

Connecting an input device such as a mouse or keyboard to the USB-A terminal on the projector enables the following computer operations from the projector.

•Showing local files of the computer

•Operating the application software

•Showing server files on the network

•Browsing of the internet

To use the LAN Display function, you need to install the software “LAN Display System” contained in the attached CD-ROM.

Important:

•Supported OS’s are Windows XP, Windows Vista and Windows 7.

•Remote desktop cannot be performed during 4-to-

1 split screen projection and during wireless LAN communication.

•Moving images cannot be displayed.

When deleting LAN Display System (Uninstallation) Important:

•When uninstalling LAN Display System, it should be ended in advance. If the application continues operating, uninstallation cannot be performed normally.

1.Select [Start]-[All Programs]-[LAN Display System]- [Uninstall].

2.The LAN Display System Uninstall window is displayed. Click [Yes].

•The uninstallation is started.

3.When the uninstallation has been completed, click [OK].

•Logs and setting files are automatically deleted.

Connection

Connect the projector and the computer either by using a commercially available LAN cable or USB wireless LAN adapter.

Installation of software

Installing LAN Display System

Before starting installation, be sure to read “ReadMe(En).txt” contained in the CD-ROM. Copy “LAN Display System.exe” contained in the TOOLS folder of CD-ROM to the hard disk of your computer.

1.Double click “LAN Display System.exe”, and start up the installer of the LAN Display System.

2.The Setup window is displayed. Click [Next].

• Installation is started.

3.When the installation has been completed, LAN Display System is automatically executed.

Computer

LAN cable (option)

To LAN terminal

Computer

To USB-A

terminal

USB wireless LAN adapter (option)

Important:

•For wired LAN connection, use a category-5 LAN cable. Both straight-through and crossover cables can be used.

•The USB-A terminal on this projector is compatible with USB 2.0.

•Do not use a USB hub for the connection.

•Supported USB device is standard USB HID device with power consumption less than 5V/500mA.

•Some USB wireless LAN adapters cannot be used depending on the specifications.

•IP address, subnet mask, default gateway values are the same for both wired LAN and wireless LAN.

•Data are not filtered between wired LAN and

EN-39 wireless LAN interface.