Mitsubishi Electronics WD385U-EST PC Less Presentation, Installation of PtG Converter-Lite

Advanced display utilities (continued)

PC Less Presentation

You can project JPEG images and the PtG contents stored in the USB device such as a USB memory without using a computer.

Also, you can perform effective presentation of them using the AutoRun function and the slideshow function.

To create PtG contents, you need to install the software “PtG Converter-Lite” contained in the attached CD-ROM.

Important:

•Supported USB Flash drive format is FAT32.

•Only one logical partition in USB Flash drive is supported.

•Supported USB device is standard USB mass storage device with power consumption less than 5V/500mA.

•JPG file preview limitation:

•	File size:	10MB or less
•	Pixel:	40 megapixel (24 bits) or less

•Dimension: 8192*6144 or less

•File Name: ASCII characters are supported.

•Thumbnail:

file thumbnail (obtained from EXIF) is supported.

•PtG file preview limitation:

•File Name: ASCII characters are supported.

•Thumbnail: file thumbnail is supported.

•PC Less Presentation does not support the following image:

•Extended DCT-based process

•Lossless process

•Hierarchical process

•Progressive scan

•Input format of YUV4:1:1, gray level with 16x16 pixels MCU

•Decoded image width less than 64 pixels for

YUV4:2:0/4:2:2 and 32 pixels for YUV4:4:4

•Decoded height less than 32 pixels

•Source images of 12-bits per sample

Installation of PtG Converter-Lite

About PtG Converter-Lite

PtG Converter-Lite is a software which converts PPT files created by Microsoft Office PowerPoint into PtG files that can be projected by PC Less Presentation. Pause/page marks and animations contained in the PPT files are also converted.

Features

•Converting up to 20 pages of PPT

•Converting into 800*600*16bpp PtG

System requirement

•CPU:

Intel Pentium-M 1.5G or above

•Memory:

256 MB or more (recommended)

•OS:

Windows XP, Windows Vista and Windows 7

•Microsoft Office:

Microsoft Office 2003 and Microsoft Office 2007

Installing PtG Converter-Lite

Before starting installation, be sure to read “ReadMe(En).txt” contained in the CD-ROM. Copy “PtG Converter-Lite.exe” contained in the TOOLS folder of CD-ROM to the hard disk of your computer.

1.Double click “PtG-Converter-setup.exe”, and start up the installer of the PtG Converter-Lite.

2.The Setup window is displayed. Click [Next].

• Installation is started.

3.When the installation has been completed, click [Finish].

When deleting PtG Converter-Lite (Uninstallation) Important:

•When uninstalling PtG Converter-Lite, it should be ended in advance. If the application continues operating, uninstallation cannot be performed normally.

1.Select [Start]-[All Programs]-[PtG Converter]- [Uninstall].

2.The PtG Converter-Lite Uninstall window is displayed. Click [YES].

•The uninstallation is started.

3.When the uninstallation has been completed, click [OK].

•Logs and setting files are automatically deleted.

EN-42