Mitsubishi Electronics WD385U-EST user manual Specifications, EN-57

Specifications

Type	DLP™ projector
Model	XD365U-EST	WD385U-EST
Rated power supply	100 - 240 V AC, 50/60 Hz
Power consumption	3.4 A
	During standby: 0.5 W (when Standby Mode is Low)
Display Technology	0.55-inch single chip Digital Micromirror	0.65-inch single chip Digital Micromirror
	Device (DMD)	Device (DMD)
	Pixels: 1024 x 768 = 786432 pixels	Pixels: 1280 x 800 = 1024000 pixels
Colors	16770000 colors
Projection lens	F 2.7, f = 5.4 mm
Light source lamp	230 W
Picture size	60-150 inch (aspect ratio 4:3)	70-180 inch (aspect ratio 16:10)
PC compatibility	Resolution: 640 x 480 (Expand) -	Resolution: 640 x 480 (Expand) -
	1024 x 768 (Real) -	1280 x 800 (Real) -
	1600 x 1200 (Compress)	1600 x 1200 (Compress)
	Sync on Green available	Sync on Green available
Video compatibility	NTSC/NTSC 4.43/PAL (including PAL-M, N)/SECAM/PAL-60
	Component Video (DVD/HDTV) (480i, 576i, 480p, 576p, 1080i, 720p, 1080p)
Speaker	10 W mono x 1
S-video input	Luminance signal: 1.0 Vp-p 75 Ω (negative sync.)
	Chroma signal: 0.286 Vp-p 75 Ω (burst signal)
Video input	1.0 Vp-p 75 Ω (negative sync.)
Audio input	350 mVrms, 10 kΩ or more
Analog RGB input	RGB: 0.7 Vp-p 75 Ω (negative sync.)
	YPBPR/YCBCR:
	Y: 1.0 Vp-p (negative sync.)
	PBPR/CBCR: 0.7 Vp-p
	HD/CS: TTL level (positive or negative)
	VD: TTL level (positive or negative)
HDMI input	HDMI 19-pin
	HDMI interface (TMDS single link) (only PCM audio is supported)
Control connector	SERIAL terminal (RS-232C)
Outside dimensions	325 x 113 x 258 mm (width x height x depth) (not including protrusion)
Weight	Approx. 4.1 kg
Temperature, humidity	+41°F (+5°C) - +95°F (+35°C), 30 - 90%
(performance guaranteed)

• The specifications and outside appearance of the projector are subject to change without prior notice.

EN-57