Advanced features (continued)
Password lock
This projector provides the password lock function that is intended to prevent wrong operations by children and set controlled access for specified users. If the password lock is enabled, when the projector is turned on, the startup screen (or splash screen) will appear and stay on the screen until the password is entered. When the password is entered, the startup screen will switch to the regular operation screen.
To set a password:
(See page 21 for menu setting.)
1.Display the Option menu.
2.Press the or button to select Password.
Password | OK |
|
|
| |||
|
|
|
|
3.Press the ENTER button.
• The Password menu appears.
|
|
|
| Password | ||
|
|
|
|
|
|
|
Password |
|
| Off | |||
Change Password |
| [ ���� ] | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Adjust |
|
| Confirm |
|
|
| Select |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
4. Press the or button to select Password.
Password | Off |
|
|
5.Press the or button to select On or Off.
6.Press the MENU button to exit the menu.
Important:
•To disable the password lock when the screen for entering the password is displayed, press the MENU and ENTER buttons on the projector at the same time.
Using the interactive pen
You can operate the computer connected to this projector using the supplied (or separately sold, commercially available) interactive pen. Before operating the computer, make the following preparation.
•For the operating procedure of the interactive pen, see the User Manual supplied with the interactive pen.
Preparation for using the interactive pen:
1.Connect the projector to the computer using the supplied USB cable as shown below.
4.Press the or button to select Change Password.
5.Press the ENTER button.
•The screen for entering a new password appears.
Password
Password |
|
| Off |
New Password | [ | ] | |
|
|
|
|
|
|
|
|
Adjust |
|
| Confirm |
|
| ||
Select |
|
|
|
•When the password has already been set, the screen for entering the old password appears instead. In such a case, enter the old password using the same operation as in next step and press the ENTER button. Then the screen for entering a new password appears.
6.Enter a 4 digit password using the , , and buttons.
(=1, =2, =3, =4)
•To cancel the procedure, press the MENU button.
7.Press the ENTER button.
8.Press the MENU button to exit the menu.
To enable or disable password lock:
(See page 21 for menu setting.)
1.Display the Option menu.
2.Press the or button to select Password.
3.Press the ENTER button.
• The Password menu appears.
Computer
To USB | USB | USB | To USB |
(type | port | ||
terminal | (type A) |
|
USB cable
2.Configure the necessary settings in the Interactive Pen menu. (See page 29.)
•To make the pairing setting, follow the procedure described below.
Settings for making the pair:
(See page 21 for menu setting.)
1.Display the Interactive Pen menu.
2.Press the or button to select Pair New Device.
Pair New Device | OK |
|
|
| |||
|
|
|
|
3.Press the ENTER button.
•The dialog appears to suggest switching to the pairing preparation mode.
4.Switch the mode of the interactive pen to the pairing preparation mode using the P button on the pen.
•For details of the operating procedure, see the
User Manual supplied with the interactive pen.
5.Press the ENTER button.
•The communication for making the pair is carried out, and then the indicator of the pen notifies whether the pairing succeeds or not.
