HDV Series Direct Vent Gas Fireplace | OPERATING INSTRUCTIONS - SIGNATURE COMMAND |
OPERATing INSTRUCTIONS 
1.STOP! Read the safety information above.
2.This appliance is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.
3.With five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information on page 38. If you do not smell gas, go to next step.
4.Install four (4) "AA" batteries (provided in your Homeowner's Manual bag) into the command center box. Make sure the batteries orientation match.
5.Press the master switch to the "ON"
6.Press "ON " button. Sparker will spark and pilot flame will light.
7.Once pilot flame is established, the main burner flame will light automatically.
8.If the pilot will not stay lit after several tries, turn the master switch to "OFF" and call your service technician or gas supplier.
| OFF | Master |
|
| Switch |
OFF | ON | ON |
|
|
Switch Box
TO TURN OFF GAS TO APPLIANCE 
1.Turn master switch to "OFF".
2.Turn off all electrical power to the appliance if service is to be performed.
38 | 56D3048 |
