Monessen Hearth HDV500NV/PV manual Brick, Rock wool & log installation, floor brick Installation

Brick, Rock wool & log installation HDV Series Direct Vent Gas Fireplace

floor brick Installation

Install floor brick before installing logs or rock wool.

1.Remove floor brick from packaging.

2.Put left and right brick pieces together as shown in Figure 58.

3.Match two (2) firebox tabs with two (2) slots on bottom of brick. Figure 58

4.Push brick down until it makes contact with bottom of firebox.

Note: Remove floor brick to install brick walls. Remove floor brick for cleaning.

Slots

Floor

Brick

Firebox Tabs

Figure 58 -

Installing Floor Brick

FP2486

Install logs and rock wool (ember material) in firebox

1. Carefully remove logs from wrapping.

2. Remove glass frame. Refer to Glass Frame Removal, Page 42.

3. Break rock wool into dime-sized pieces. Cover rear burner completely with rock wool. On front burner, only cover the ports. Do not exceed 1/2" depth of coverage. Figure 59

Rock Wool Covering

Only the Ports in the

Front Burner

Figure 59 -

Place Rock Wool

Rock Wool Covering Entire Back Burner

LG686

56D3048 43