Monessen Hearth LX32DV Facing Installation, Install Facing, LX Series Direct Vent Gas Fireplace

FACING INSTALLATION LX Series Direct Vent Gas Fireplace

notice

Your firescreen’s finish has been covered at the factory with a protective enamel coating and should never be polished, nor should it ever need to be polished. Instead of polishing, clean with a mild soap solution using a clean cotton terry cloth, then dry. To remove any stubborn stains from the glass, use a mild soap solution, followed by a dampened towel (dampened with clean water only), followed by a dry towel without using soap. Do not use ammonia or ammonia-based glass cleaner on the firescreen, as these types of cleaners may damage the finish of your firescreen. Minor finish scratches and fingerprints can be removed by applying 50/50 vinegar and water solution before lighting the heater. Any fingerprints left on the facing will be permanent when heater is lit.

Install Facing

Figure 48

1.Align the four (4) holes on the facing with the four (4) holes on the fireplace.

2.Attach facing with four (4) fasteners provided.

Decorative Finish

Facings use Finale

Nuts and Studs

Standard Black

Facings use Bolts

Figure 48 -

Install Filigree Facing

IMPORTANT: To open door with decorative finish facing, lift door up then rotate door down.

Bolts

FP2720

Facing

51D0528 33