Monessen Hearth LX32DV Clearances to combustibles, mantel clearances, Hearth requirements

CLEARANCES LX Series Direct Vent Gas Fireplace

Clearances to combustibles

WARNING

Follow these instructions carefully to ensure safe installation. Failure to follow instructions exactly can create a fire hazard.

The appliance cannot be installed on a carpet, tile or other combustible material other than wood flooring. If installed on carpet or vinyl flooring, the appliance shall be installed on a metal, wood or noncombustible material panel extending full width and depth of the appliance.

Ceiling

Side Wall

Combustible

Mantel

12” (305 mm) Max. Depth

mantel clearances

NOTE: The combustible area above the facing must not protrude more than 3/4" from the facing. If it does, it is considered a mantel and must meet the mantel requirements listed in this manual.

Hearth requirements

Noncombus- tible Facing

The fireplace must be installed on a non-combustible hearth extending a minimum of 12" from the fireplace opening (local codes may require a larger hearth). The hearth must also extend to both sides of the face (see the table above

for the exact width of the face).

9” (229 mm)
Minimum			LX32
		LX36 - 30”
					-
LX32					34”		(762
						(864			mm)
LX36 -	39”
	-							mm)
	43”		(991	mm)
		(1092
				mm)

Figure 5 -

Clearances to Combustible Materials

466M”

(1187 mm)

446M”

(1137 mm)

6”

(152 mm)

12” (305 mm)

Minimum

FP2711

51D0528