Monessen Hearth WDV500 Remote Control Operation, WDV Series Gas Fireplace, Low Battery Detection

REMOTE CONTROL OPERATION WDV Series Gas Fireplace

ON/OFF AUX Control (Optional)	°F
Figure 47
1. Press AUX button once to turn ON. AUX shows on the LCD.	AUX

2. Press AUX button again to turn OFF. AUX icon disappears.

FP2149

Figure 47 -

AUX Display

Low Battery Detection

Figure 48

1.Battery voltage is checked once a minute. When the battery voltage drops to a certain level, the low-battery icon will display on LCD, and the transmitter will turn off the fire- place. The transmitter will not function anymore until fresh batteries are installed.

2.When the batteries are low, the LCD displays a low battery indicator. The low battery indicator will be displayed in any mode.

3.The transmitter will not operate with low batteries. Change the batteries before the bat- teries are too weak for normal operation. Turn the unit OFF before replacing batteries.

°F

FP2150

Figure 48 -

Low Battery Display

Child-Proof Protection

Figure 49

1.Press and hold the ON and OFF buttons simultaneously for three (3) seconds to enter child proof mode. Figure K

2.The transmitter will not send a signal again until the childproof mode is deactivated by pressing the ON and OFF buttons simultaneously for three (3) seconds to exit child proof mode and the Childproof indicator disappears from LCD.

°F

FP2151

Figure 49 -

Child Protection Display

Transmitter Thermal Shutdown

Figure 50

1.If transmitter measures a room temperature exceeding 99° F, the LCD will display "HI" and the transmitter will turn off the fireplace.

2.Transmitter will not function until the room temperature has dropped below 99° F. If transmitter measures a room temperature less than 40° F, the LCD will display "LO" and NO SIGNAL will be sent to turn on the fireplace.

FP2152

Figure 50 -

Thermal Shutdown Display

78D0011 35