4 DIAGNOSTICS
Separable Security
This diagnostic displays information on the CableCARD and CableCard Interface with the DCH.
Field | Description | |
|
| |
CARD Interface | CableCARD Interface is a status indication of the interface between the Host | |
| and CableCARD. It will indicate ‘Good’ if no errors were detected, ‘Error’ if | |
| there is a problem detected with establishing the CableCARD interface, or | |
| ‘Unsupported CARD’ if the inserted CableCARD is not an | |
|
| |
CableCARD ID | The unique identifier provided by the CableCARD. | |
|
| |
Host ID | The unique identifier in the Host Device Certificate. | |
|
| |
Data ID | A value generated by the CableCARD for the Pairing report. | |
|
|
|
Validation | • | UKNOWN if a Validation message was not received by the product. |
| • | VALID or INVALID as set by the Host Validation Message received |
|
| from the headend. |
| • | BINDING if the CableCARD is busy with the binding authentication |
|
| process. |
| • | NOT BOUND if Card validation status in not bound for CableCARD |
|
| reasons. |
| • | HOST CERTIFICATE INVALID if the status is not bound because |
|
| the Host Certificate was invalid. |
| • | HOST SIGN FAILED if status is not bound because of failure to |
|
| verify Host’s SIGN. |
| • | AUTH KEY FAILED if status in not bound because of failure to |
|
| match AuthKey from the Host Device. |
| • | FAILED if binding failed for other reasons. |
|
| |
Pairing Rpt Method | Set to ‘MMI’ or ‘Reportback’ as received by a message from the headed, or | |
| set to ‘Unknown’ if the headend message was not received. | |
|
| |
MSO Phone Number | MSO Phone Number as configured at the headend. | |
|
|
|
CableCARD |
|
|
|
|
|
36
