5 TROUBLESHOOTING
Problem | Possible Solution |
|
|
There are black bars | This may occur on a 4:3 TV if the 4:3 OVERRIDE setting is OFF. To set 4:3 SD |
on all four sides of the | programming to fill the screen, depending on the capabilities of the TV, set |
picture | 4:3 OVERRIDE to 480i or 480p. |
| This may occur on a 16:9 TV if the active video for an SD broadcast is in letterbox |
| format. To confirm, wait for a commercial or look for a graphic, such as a network logo. |
| If the commercial fills the screen from top to bottom, or the graphic appears below the |
| active video, the program is being letterboxed by the broadcaster. You can minimize |
| this by activating the zoom feature on the TV. |
| A broadcaster may include black bars on either side of a wide screen broadcast. This |
| is called a “hybrid” aspect ratio and results in a black border surrounding the video on |
| a 4:3 TV. Because this is part of the broadcast, the DCH6416 cannot correct the video. |
| You may be able to minimize the border using the zoom feature on the TV. |
|
|
Colors do not appear | Be sure to match up each signal to the same YPbPr connection on the TV. Otherwise, |
correctly | colors will not appear correctly on your TV. |
|
|
The DCH receiver is | The DCH6416 includes an integrated hard drive and a fan for cooling. During normal |
making a humming | operation, the DCH6416 emits a low humming noise, similar to a personal computer. |
noise. | The noise varies in volume occasionally when the speed of the internal fan adjusts to |
| changes in the temperature around the DCH receiver. Please note the hard drive will |
| stay on even when the DCH6416 is turned off (standby). |
67
