Setting Backlight Timer
The backlight illuminates the keypad and display when you receive or make calls. You can set the amount of time that the backlight stays on to 5, 10, 20, or 30 seconds, or set it to stay on continuously or stay off at all times.
1Press m, then scroll to Settings. Press A under SELECT. Press R to scroll to Initial Setup. Press A under SELECT.
2From the Initial Setup screen, press R to scroll to Backlight.
3Press B under CHANGE.
4Press S to scroll to the desired backlight option.
5Press B under SELECT.
IMPORTANT: Setting the backlight to stay on continuously may degrade backlight brightness over time.
Setting Photosensor
To conserve battery power, the photosensor will disable the backlight when you are in good lighting conditions. To force the backlight to come on every time a key is pressed, turn the photosensor off.
NOTE: Turning the Photosensor OFF, which forces the backlight to come on every time a key is pressed, will drain your battery power.
1From the Initial Setup screen, press R to scroll to Sensor.
2Press B under CHANGE.
3Press S to scroll to the desired option.
4Press B under SELECT.
Adjusting Status Light
The status light is part of your phone’s power button. It illuminates when the phone is on. You can turn the status light feature on or off from the Initial Setup screen.
