Programming the i580 Unit | Motorola I580 instruction

BASIC LEVEL TEST MODES AND PROCEDURES: Programming the i580 Unit

6.4Programming the i580 Unit

Use Radio Service Software (RSS) to activate a new software utility or to program specific codeplug user information.

Refer to Radio Service Software’s Help Menu, iDEN Service Bulletins, the Motorola iDEN website, or contact iDEN Customer Care for information on the setup and use of RSS.

NOTE: iDEN Service Bulletins, Software Utilities, and Updates can be found online at: http://idenphones.motorola.com/iden/support/

6.5Connecting the Unit to the RSS Workstation

Some technician tests enter programming information into the unit. To perform these tests, the unit must be correctly connected to the test equipment.

Recommended equipment: RS232 data cable(NKN6560A) or USB data cable(NKN6559A) and a PC computer workstation with RSS installed.

NOTE: For a list of recommended programming equipment, applicable part numbers, and

descriptions, refer to Appendix A: Ordering Replacement Parts and Kits.

To connect the unit to a PC using the iDEN RS-232(serial) or USB data cable (Figure

6-1):

1.Insert the 17-pin connector on the data cable to the 17-pin connector located at the base of the unit.

2.Attach the other end of the data cable to the RS-232 port or USB port on the RSS computer workstation that is used for testing purposes.

Computer

Workstation

(RSS)

Unit Under Test

Serial Port/

USB Port

RS232 Data Cable

or

USB Data Cable

Figure 6-1. Data Cable Programming Setup

68P80401P05

41

Image 56

Motorola I580 service manual Programming the i580 Unit, Connecting the Unit to the RSS Workstation

Contents

IDEN Digital Multi-Service, Data-Capable Portable I580 Manual Revisions Safety and General Information Electro Magnetic Interference Compatibility Medical Devices Accessory Safety Information Cleaning and Drying Considerations Safety and General Information Model Information Model Numbering System Model Specifications General Receiver Transmitter Contents Chapter Basic Level Test Modes and Procedures Chapter Field Level Test Modes and Procedures Appendix a Ordering Replacement Parts and Kits How This Manual Is Organized PrefaceWho Should Use This Manual Conventions Used in This Manual Related Publications Overview IDEN Digital Modulation Technology Spectrum of iDEN Quad 16QAM IDEN Voice Compression Technology RF Transmission Bursts Calling Area Coverage MOTOtalk Bluetooth Wireless SystemGlobal Positioning System GPS Section To remove a SIM card Figure SIM CardsRemoving and Inserting a SIM Card Removing a SIM Card To insert a SIM card Figure FEATURES, ICONS, and Indicators I580 Features Display Icons Main Menu Icons Status Icons Power-Up Sequence DISPLAYS, MESSAGES, and Alerts Power-Down Sequence Self-Test ErrorsSelf-Test Reset Errors Messages Service Messages Service Messages Alert Tones Alert Tones Alert Tones Alert Tones To set unit to vibrate for all calls Using the Optional Vibrate FunctionVibrator Settings From the main menu, select Settings 2-Way Radio Alert Type Preparing for Basic Level Testing Reference AccessoriesTest Equipment Reference Unit Reset Condition Basic Level Checks and Self TestsCustomer Care Test Conditions Basic-Level Test Checklist Preventive MaintenanceBasic-Level Test Checklist To clean the unit takes approximately 3 minutes Mechanical and Electrical Checks SIM Card Swap TestShock and Pressure test time is approximately 3 minutes SIM Card Swap test time is approximately 5 minutes Accessory Swap Test Accessory Swap test time is approximately 5 minutesLockup Test Lockup Test time is approximately 6 minutes Battery Connections Test Testing the GPS ReceiverBattery Connections test time is approximately 5 minutes To test the GPS Receiver Voltage Recognition test time is approximately 4 minutes Self-Test ProceduresVoltage Recognition Test Passcode test time is approximately 5 minutes Programming Menu Settings CheckPasscode Test From the main menu, select Settings Display/Info Contrast Phone Calls Features Way Radio Options Personalize Volume FeaturesSecurity Features From the main menu, select Settings Security GPS PIN Advanced Features Call Performance Test Call Performance test time is approximately 7 minutes Basic Level Test Modes and Procedures Entering Debug ModeTo enter Debug/Trace Mode Test Modes Trace Mode Display Screens Display Screens GPS Test Mode Test Procedures Entering Test ModeTo enter Test Mode Audio Loopback Test ESN and Imei Matching Test Debug CheckAudio Loopback test time is approximately 3 minutes ESN/IMEI Matching test time is approximately 6 minutes To monitor the data in the unit 68P80401P05 Technician Test Procedures Connecting the Unit to the RSS Workstation Programming the i580 Unit Codeplug Help Codeplug TroubleshootingTo access the codeplug Help topic in Windows Preparing for Field Level Testing Preparing Equipment for Testing Using RSS Connecting an iDEN Unit to the R-2660 Typical R-2660 Setup To connect the unit to the R-2660 RF Zone Fields and Values To enter Initial Registration modeOperating the R-2660 Disassembling and Reassembling the Unit Disassembly Sequence FlowchartAssembly/Disassembly Procedures Remove Remove Battery CoverInstall Remove Battery Remove SIM Card Remove Antenna Preparing for Field Level Testing Remove Antenna Remove Back Housing Remove Main Board, Keypad Remove Flip Assembly Procedure to remove flip assembly Preparing for Field Level Testing Remove Flip Assembly Install Flip Assembly Procedure to install flip assembly Preparing for Field Level Testing Install Flip Assembly Exploded View and Parts List I580 Component Parts List I580 Exploded View Field Level Test Modes and Procedures Field-Level Test Checklist Required Test Equipment Field-Level Test Checklist Done Technical Tests Pass Fail See the Strong Signal Environment section Registration/Call Test Signal Quality Error SQE Test R-2660 TX Power Test See Entering Test Mode Press Menu, Edit Bit Error Rate BER Test Pass Power-Up Test Keypad Test Audio Test Use this test to check the audio portion of the unit Reset Test Reset Reset Log Test To perform the reset log test Model Assembly MA Test Mode Test GPS Global Positioning System Receiver Test Use this test on a unit to check its GPS functionality Yes Bluetooth Test This Page intentionally left blank Mechanical Parts Rework and Repair Recommended Equipment Rework/Repair Requirements Recommended ToolsRecommended Supplies Board Preparation Components Identification Mechanical Parts Rework Procedure Removal ProcedureLand Preparation Procedure Installation Procedure 5 J752 Audio Jack 4 J600 RF Connector6 J401 30 Pin Board-to-Flex Connector 9 M105 Battery Contact 7 J400 80 Pin Board-to Flex Connector8 M002 Simm Connector 11 J753 Microphone Socket SW-all Key/Switch10 M2 2 Pin-Contact 13 D401 through D412 LED Ordering Replacement Parts and Kits Customer ServiceReplacement Parts Domestic Orders Replacement Kits Table A-1 Mid Rate Travel Chargers Bluetooth Accessories NNTN2344 NA Recommended Test Equipment and Tools Recommended Programming EquipmentTable A-2. Recommended Test Equipment and Tools Table A-3. Recommended Programming Equipment Table A-4. Recommended Software TTY @68P80401P05@