Technician Test Procedures | Motorola I580 manual

BASIC LEVEL TEST MODES AND PROCEDURES: Technician Test Procedures

24.Scroll down to highlight Band Info, and then press View to view the Band Info display. This screen displays the primary and secondary control channels: Pri Band: 02 for 800 MHz; Sec Band: 02 for 800 MHz and 04 for 900 MHz.

25.Press Back to return to the Trace Mode display.

26.Scroll down to highlight Bandmap, and then press View to view the Bandmap display. This screen displays the currently selected regional bandmap.

27.Press Back to return to the Trace Mode display.

28.Scroll down to highlight Hardware, and then press View to view the Hardware display. This screen displays RF Xtal (RF Crystal), a factory-tuned parameter that adjusts the output frequency; Xtal Offset (RF Crystal Warp offset), which is derived during frequency compensation; and Level Set (Level Set value), which regulates the transmit output power of the unit.

29.Press Back to return to the Trace Mode display.

30.Scroll down to highlight Fatal Err/#, and then press View to view the Fatal Err/# display. This screen displays the Fatal Error log. This log contains a count of any fatal errors logged during the unit's automatic self test.

31.Press Back to return to the Trace Mode display.

32.Scroll down to highlight Flags, and then press View to view the Flags display. This screen displays the error log, which contains any errors logged by the unit software.

33.Press Back to return to the Trace Mode display.

34.Scroll down to highlight Coin Cell, and then press View to show the Preset Charging Voltage on line 1 and Current Battery Voltage on line 2.

35.Press Back to return to the Trace Mode display.

36.Scroll down to highlight CE Status, and then press OK to view accessory type connected to the unit.

37.Press Back to return to the Trace Mode display.

6.3Technician Test Procedures

Technician Tests usually require special equipment to test the functionality of the components in the unit.

The following tests check the software functionality of the unit:

•Codeplug Help

•Codeplug Troubleshooting

40	68P80401P05

Image 55

Motorola I580 service manual Technician Test Procedures

Contents

IDEN Digital Multi-Service, Data-Capable Portable I580 Manual Revisions Safety and General Information Medical Devices Electro Magnetic Interference Compatibility Cleaning and Drying Considerations Accessory Safety Information Safety and General Information Model Numbering System Model Information General Receiver Transmitter Model Specifications Contents Chapter Basic Level Test Modes and Procedures Chapter Field Level Test Modes and Procedures Appendix a Ordering Replacement Parts and Kits Who Should Use This Manual PrefaceHow This Manual Is Organized Related Publications Conventions Used in This Manual IDEN Digital Modulation Technology Overview Spectrum of iDEN Quad 16QAM RF Transmission Bursts IDEN Voice Compression Technology Calling Area Coverage Global Positioning System GPS Section Bluetooth Wireless SystemMOTOtalk Removing and Inserting a SIM Card SIM CardsTo remove a SIM card Figure To insert a SIM card Figure Removing a SIM Card I580 Features FEATURES, ICONS, and Indicators Main Menu Icons Display Icons Status Icons DISPLAYS, MESSAGES, and Alerts Power-Up Sequence Messages Power-Down SequenceSelf-Test Errors Self-Test Reset Errors Service Messages Service Messages Alert Tones Alert Tones Alert Tones Alert Tones Vibrator Settings Using the Optional Vibrate FunctionTo set unit to vibrate for all calls From the main menu, select Settings 2-Way Radio Alert Type Reference Unit Preparing for Basic Level TestingReference Accessories Test Equipment Test Conditions Reset ConditionBasic Level Checks and Self Tests Customer Care To clean the unit takes approximately 3 minutes Basic-Level Test ChecklistPreventive Maintenance Basic-Level Test Checklist SIM Card Swap test time is approximately 5 minutes Mechanical and Electrical ChecksSIM Card Swap Test Shock and Pressure test time is approximately 3 minutes Lockup Test time is approximately 6 minutes Accessory Swap TestAccessory Swap test time is approximately 5 minutes Lockup Test To test the GPS Receiver Battery Connections TestTesting the GPS Receiver Battery Connections test time is approximately 5 minutes Voltage Recognition Test Self-Test ProceduresVoltage Recognition test time is approximately 4 minutes Passcode Test Programming Menu Settings CheckPasscode test time is approximately 5 minutes Phone Calls Features From the main menu, select Settings Display/Info Contrast Way Radio Options Security Features Volume FeaturesPersonalize From the main menu, select Settings Security GPS PIN Call Performance Test Advanced Features Call Performance test time is approximately 7 minutes Test Modes Basic Level Test Modes and ProceduresEntering Debug Mode To enter Debug/Trace Mode Display Screens Trace Mode Display Screens GPS Audio Loopback Test Test Mode Test ProceduresEntering Test Mode To enter Test Mode ESN/IMEI Matching test time is approximately 6 minutes ESN and Imei Matching TestDebug Check Audio Loopback test time is approximately 3 minutes To monitor the data in the unit 68P80401P05 Technician Test Procedures Programming the i580 Unit Connecting the Unit to the RSS Workstation To access the codeplug Help topic in Windows Codeplug TroubleshootingCodeplug Help Preparing Equipment for Testing Preparing for Field Level Testing Connecting an iDEN Unit to the R-2660 Using RSS To connect the unit to the R-2660 Typical R-2660 Setup Operating the R-2660 To enter Initial Registration modeRF Zone Fields and Values Assembly/Disassembly Procedures Disassembly Sequence FlowchartDisassembling and Reassembling the Unit Install Remove Battery CoverRemove Remove Battery Remove Antenna Remove SIM Card Preparing for Field Level Testing Remove Antenna Remove Back Housing Remove Main Board, Keypad Procedure to remove flip assembly Remove Flip Assembly Preparing for Field Level Testing Remove Flip Assembly Procedure to install flip assembly Install Flip Assembly Preparing for Field Level Testing Install Flip Assembly I580 Component Parts List Exploded View and Parts List I580 Exploded View Field Level Test Modes and Procedures Required Test Equipment Field-Level Test Checklist Done Technical Tests Pass Fail Field-Level Test Checklist Registration/Call Test See the Strong Signal Environment section R-2660 Signal Quality Error SQE Test See Entering Test Mode Press Menu, Edit TX Power Test Pass Bit Error Rate BER Test Power-Up Test Keypad Test Use this test to check the audio portion of the unit Audio Test Reset Reset Test To perform the reset log test Reset Log Test Model Assembly MA Test Mode Test Use this test on a unit to check its GPS functionality GPS Global Positioning System Receiver Test Yes Bluetooth Test This Page intentionally left blank Recommended Equipment Mechanical Parts Rework and Repair Recommended Supplies Recommended ToolsRework/Repair Requirements Components Identification Board Preparation Installation Procedure Mechanical Parts Rework ProcedureRemoval Procedure Land Preparation Procedure 6 J401 30 Pin Board-to-Flex Connector 4 J600 RF Connector5 J752 Audio Jack 8 M002 Simm Connector 7 J400 80 Pin Board-to Flex Connector9 M105 Battery Contact 10 M2 2 Pin-Contact SW-all Key/Switch11 J753 Microphone Socket 13 D401 through D412 LED Domestic Orders Ordering Replacement Parts and KitsCustomer Service Replacement Parts Table A-1 Replacement Kits Mid Rate Travel Chargers Bluetooth Accessories NNTN2344 NA Table A-3. Recommended Programming Equipment Recommended Test Equipment and ToolsRecommended Programming Equipment Table A-2. Recommended Test Equipment and Tools TTY Table A-4. Recommended Software @68P80401P05@