Motorola I580 service manual Remove Flip Assembly, Procedure to remove flip assembly

PREPARING FOR FIELD LEVEL TESTING: Remove Flip Assembly

7.14Remove Flip Assembly

7.14.1Procedure to remove flip assembly:

Tools: Black stick. NO metallic tools!

NOTE: i580 flip components include a Flex Connector ribbon which can be easily torn or damaged if not handled properly. Handle the Flex Ribbon with care especially when working it through the front housing slot.

1.Remove the keypad and main board from the front housing. Make sure the flip is in the open position.

2.Remove the three T-4 screws securing the frame-flip center hinge. Flip the unit over and lift the flip-center hinge straight up to remove.

3.Locate the slight gap between the right knuckle and flip assembly. Align the flat tip of the black stick with the gap.

2

3

Figure 7-8.

54 68P80401P05