BASIC LEVEL TEST MODES AND PROCEDURES: Test Mode Test Procedures
11.Press Back to return to the Trace Mode display.
12.Scroll down to highlight GPS, and then press View to view the GPS display.
a.Location selection displays the number of satellites used to obtain the position fix, the current cell site latitude and longitude, the subscriber unit latitude and altitude information, as well as the last calculated horizontal and vertical accuracy.
b.Time selection contains iDEN time information used to determine accurate GPS time.
c.Assist selection contains the subscriber unit latitude, longitude and horizontal accuracy in meters as well as an indication of whether the data is valid or not.
d.Navigation selection contains the heading as well as velocity and velocity error in kilometers/hour.
e.Summary selection contains time and longitude/latitude expressed in degrees. Accuracy in meters is also displayed.
f.GPS Version contains information about the custom Sirf software used in the unit.
13.Press Back to return to the Trace Mode display.
14.Scroll down to highlight IMEI/SIM ID, and then press View to view the IMEI/SIM ID display. The IMEI is the global name assigned to the mobile station at manufacturing time and should correspond to the
15.Press Back to return to the Trace Mode display.
16.Scroll down to highlight Registr Log, and then press View to view the Registr Log display. This screen displays the Dispatch Log, Interconnect Log, Packet Data Log, Mobile IP Log, and Phone Rst Log. Registration Log information is updated when the user deselects and selects the Registr Log choice.
17.Press Back to return to the Trace Mode display.
18.Scroll down to highlight Err/Chan Codes, and then press On to view the Err/Chan Codes display. This screen displays the physical channel that the unit is connected to or the radio link procedure that is currently active. Also, displays error codes of errors encountered during normal operation if Err/Chan codes is On. (At power up, Err/Chan Codes is Off)
19.Press Back to return to the Trace Mode display.
20.Scroll down to highlight Current Freq, and then press View to view the Current Freq display, which shows the current frequency and band.
21.Press Back to return to the Trace Mode display.
22.Scroll down to highlight Dispatch IDs, and then press View to view the Dispatch IDs display. This screen displays the dispatch group id affiliated with the unit in the current dispatch- location area. Also, displays the dispatch individual id affiliated with the unit in the current dispatch location.
23.Press Back to return to the Trace Mode display.
68P80401P05 | 39 |
