Motorola M68HC08 manual Application Hardware and Software Configuration, Hardware Configuration

Freescale Semiconductor, Inc.

Freescale Semiconductor, Inc.

User Guide

Application Hardware and Software Configuration

6.4 Application Hardware and Software Configuration

6.4.1 Hardware Configuration

As mentioned, the software can be configured to run on one of the three hardware and motor platforms:

•High-Voltage Hardware Set Configuration

•Low-Voltage Evaluation Motor Hardware Set Configuration

•Low-Voltage Hardware Set Configuration

The hardware setups are shown in Figure 6-1, Figure 6-2, and

Figure 6-3. These setups are described in following subsections (see

Hardware and Drive Specifications for each platform characteristics).

The supplied controller boards for MC68HC908MR32 (ECCTRMR32) allows two possibilities for software execution:

1.MMDS Evaluation Board (KITMMDSMR32)

Using a real-time debugger (supplied with the Metrowerks compiler) the evaluation board is connected to the controller board (ECCTRMR32) via an emulator connector. This solution is recommended for software evaluation.

2.Programmed MCU (MC68HC908MR32)

Where a daughter board module, with MC68HC908MR32 processor, is plugged into the controller board (ECCTRMR32) instead of the emulator cable, the processor must be programmed in an external programmer. This solution is recommended for final tests.

Figure 6-1, Figure 6-2, and Figure 6-3show the configuration with

MMDS evaluation board.

NOTE: All the system parts are described in Section 4. Hardware Design. They can be ordered as a standard products. For the the supply and in detail document references see Section 4. Hardware Design.

DRM028 — Rev 0		Designer Reference Manual
MOTOROLA	User Guide	113
	For More Information On This Product,
	Go to: www.freescale.com