Motorola M68HC08 manual Application HC08 Software Files, Application HC08 software files are

Freescale Semiconductor, Inc.

Freescale Semiconductor, Inc.

User Guide

For application PC master software (remote) control, the following software is needed:

•PC master software for PC — installed on your PC computer

•Sensorless BLDC application PC master software control files (located in bldc_zerocros08MR32\pc_master directory)

Both the HC08 and PC master software control files for the sensorless BLDC application are delivered together in the bldc_zerocros08MR32 directory. It consists of files listed in Application HC08 Software Files.

6.4.2.1 Application HC08 Software Files

The application HC08 software files are:

•...\bldc_zerocros08MR32\bldc_zerocross.mcp, application project file

•...\bldc_zerocros08MR32\sources\const_cust_hv.h, definitions for software customizing for high voltage (230/115 Vac) power board

•...\bldc_zerocros08MR32\sources\const_cust_evm.h, definitions for software customizing for EVM motor board (12 V low power)

•...\bldc_zerocros08MR32\sources\const_cust_lv.h, definitions for software customizing for low voltage (12 Vdc) power board

NOTE: Change the code_fun.c file to include (#include) one of const_cust_hv.h, const_cust_evmm.h, or const_cust_lv.h files according to the hardware platform used! See Table 6-1.

Table 6-1. Required Software Configuration

for Dedicated Hardware Platform

Hardware	Dedicated	Required Software
Platform	Customizing File	Configuration
		#include const_cust_hv.h
High-voltage hardware	const_cust_hv.h	into code.fun.c
		(done with default software
		setting)

Designer Reference Manual		DRM028 — Rev 0
118	User Guide	MOTOROLA
	For More Information On This Product,
	Go to: www.freescale.com