5 - 18 MC70 User Guide
Cables
This section descri be s how to set u p and u se the ca bles. The cables are availab le with a varie ty of conne ction
capabilities.
The following communication/charg e cables are available:
•
Serial (RS232) Charge cable (9-pin D female with power input re ceptacle)
•
USB Client Charge cable (standard-A connector and a barrel receptacle for power)
•
Auto charge cable
•
DEX cable
•
Modem inverter cable.
The following printer cables are available directly from the printer manufacturer:
•
O’Neil Printer cable
•
Zebra Printer cable .
Figure 5-19
Cables
Communication/charge cables:
•
Provide the EDA with opera ting and char ging powe r when used with the Symbol approve d power sup ply.
•
Synchronize information between the EDA and a host computer. With customized or third party sof tware,
it can also synchronize the EDA with corporate databases.
•
Provide serial connection through the serial pass-through port for communication with a serial device,
such as a host computer. For communication setup procedures, refer to the MC70 Integrator Guide.
•
Provide USB connection through the USB p ass-through por t for communication with a USB device , such
as a host computer. For communication setup procedure s, refer to the MC70 Integrator Guide.
Dedicated printer cables provide communication with a printer.