Using the MC70 2 - 19
•
Tap and Hold: Tap and hold the stylus on an item to see a list of actions available for that item. On the
pop-up menu that appears, tap the action to perform.
•
Drag: Hold the stylus on the screen an d drag across the screen to select text and images. Drag in a list to
select multiple items.
Using a Headset
You can use a stereo headset for audio communication when using an audio-enabled ap plication. To use a
headset, plug the headset jack into the audio connector on the side of the EDA. Set the EDA’s volume
appropriately before putting the headset on. Plugging a headset into the jack mutes the speaker.
For the best audio performance, Symbol recommends a 2.5mm jack headset, p/n 50-11300-050.
Figure 2-15
Using a Headset
NOTE Symbol recommends using the spring-loaded tip of the stylus to write on the screen, and the back end of
the stylus to tap the screen. Use your finger to press the Power button and keypad buttons.
CAUTION To prevent damage to the screen, do not use any device other than the Symbol -p ro vi de d stylus.