Using Bluetooth 3 - 15
Copying a File
To copy a file to a remote device:
1. Tap and hold on the file an d select Put. The Send Local File window appears.
2. Navigate to the direc tor y to sa ve the file and select a file.
3. Tap Open. The file copies from the EDA to the remote device.
Connecting to the Internet Using an Access Point
This section explains how to access a Bluetooth-enabled LAN access point (AP) for a network conne ction. Use
Internet Explorer to connect to a server.
1. Ensure the EDA is discoverable and connectable. See Bluetooth Settings on p age 3-24.
2. Discover and bond (pair) with the remote access point. See Bonding with Discovered Device(s) on page
3-9.
3. In BTExplorer, select the Remote Devices folder.
4. Select the Tru sted Devices folder.
5. Tap the remote device folder.
6. Tap and hold on the remote device and select Explore from the pop-up menu.
7. Tap and hold LAN Access using PPP service and select Connect from the pop-up menu. The EDA conne cts
with the access point.
8. Tap Start > Internet Explorer. The Internet Explorer window appears.
9. In the address field, enter an internet addre ss and tap the Enter button. The web page loads.
Dial-Up Networking Services
To use a phone that has Bluetooth capabilities as a modem for the EDA, create a Bluetooth modem connection
on the EDA and send information to the phone using Bluetooth. The phone relays the information over the
phone line and sends back to the EDA any information that was requested over the connection. After creating
a modem connectio n to the Bluetooth phone, you can reuse it.
Prior to creating a connection, ensure the following:
•
Bluetooth phone is turned on.
•
Bluetooth phone is discoverable. (Some phones must also be pairable to accept a bonding request. For
more information, refer to the phone documentation.)
•
EDA’s and phone's Bluetooth radios are turned on.
•
EDA and phone are within range of each other (30 feet/10 meters).