Using the MC7004/94/95 Phone 4 - 5

Answering a Call

A dialog box appears on the EDA when it receives an incoming call. If the phone is set to ring, a ring tone
sounds. Answer or ignore the incoming call.
To answer an incoming call ta p Answer on the Phone > Incoming... dialog or press the gre en phone key on the
EDA keypad.
Figure 4-5
Incoming Call
To ignore the incoming call tap Ignore. This may send the caller to voice mail, depending on the service
provider. Otherwise, this presents Busy to the calling p arty.
To end the call tap End or press the red ph on e key on the EDA keypad.

Audio Modes

The EDA offers three audio modes to use during phone calls:
•
Spea ker Mode: Use the EDA as if on speaker phone. Tap the Speaker On button to activate this mode.
•
Receiver/Handset Mode : Switches audio to the speaker at th e to p fron t of the EDA, so you can use the
EDA as a handset. To select this mode, tap Speaker Off.
•
Headset Mode: Connect a headset to the headset jack to automatically switch audio to the headset.
Figure 4-6
Speaker Button