Sending a Call, Receiving a Call | Motorola pro7100 specs

Method 2 (if programmed by your dealer [see pages 4 -5]).

1Press the Home Revert button.

Method 3 (if programmed by your dealer [see pages 4 -5]).

1Press the Direct Channel Access button.

2Enter the desired channel using the enhanced keypad microphone.

3uto conﬁrm your selection.

If your system uses the request-to-talk feature, use the following method to send a call:

1Turn your radio on.

2yor zto select the desired channel.

3Press the PTT (for priority requests to talk, the PRTT button) and wait for the talk permit tone.

4Hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth. Press the PTT to talk; release it to listen.

5Release the PTT to listen.

SENDING A CALL

1Turn your radio on.

2yor zto select the desired channel.

3Hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth. Press the PTT to talk; release it to listen.

RECEIVING A CALL

1Turn your radio on.

2Adjust the radio’s volume if necessary (see page 11).

3Select the desired channel.

4To respond, hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth. Press the PTT to talk; release it to listen.

13

GETTING STARTED

English

Image 18

Motorola pro7100 manual Sending a Call, Receiving a Call, Press the Direct Channel Access button

Contents

Profesionales Contents Audio/Tone Settings Utilities Safety and WarrantyAccessories Phone Computer Software Copyrights Iii Contents Radio Overview Parts of the Radio Optional Enhanced Keypad Microphone RMN4026 Channel Selector/Menu Navigation Buttons On/Off/Volume KnobLED Indicators Programmable Buttons Function Indicator Short Press Long Press Hold Down Button Toggle between activating and deactivating Menu Keys Push-to-Talk PTT ButtonMicrophone Exit Up Menu Use with Enhanced Keypad Microphone RMN4026 Entering Characters Using the Keypad Number of Times Key is Pressed Companding Symbol IndicationPower Level Carrier Squelch Audio Indicators for Programmable Buttons Getting Started Adjusting the VolumeVolume Control knob Turning the Radio on or OFF Press the Direct Zone Access button Selecting a ZoneSelecting a Radio Channel Press the Direct Channel Access button Sending a CallReceiving a Call Getting Started Radio Calls Making a Selective CallReceiving a Selective Call F Sending a Call Alert Receiving a Call Alert Radio Check Sending a Status Sending a Message Receiving a Message Sending AN Emergency Alert EDisplays Selective Radio Inhibit Editing a Radio Call List KShow Repeater or Talkaround J Mode Setting the Power Level BTto return to Name and CALL/MESSAGE Tone Tagging You will see Call Tone Tag Radio Calls Scan Starting or Stopping Scan G Editing a Scan List TalkbackDeleting a Nuisance Channel Restoring a Channel to the Scan List Adding or Deleting Channels in a Scan List Delete Entry? Setting Priority Channels Prioritizing a Channel in a Scan ListScanning Sequence To return to Scan Phone Making a Phone Call DTo select Modifying the Phone List K Enter Name Deleting an Entry Edit Name? Edit Codes? Phone AUDIO/TONE Settings Audio/Tone SettingsFeature What it Does Settings AUDIO/TONE Settings Utilities Features Utilities Allows you to select the language displayed on the display Setting the Time Yor z until Displaying the Time Selecting the Display LanguageOr z until Safety and Warranty Safe and Efficient Operation of Motorola TWO-WAY RadiosExposure to Radio Frequency Energy Vehicles with an Air Bag Potentially Explosive Atmospheres Blasting Caps and Blasting Areas Mobile Radio Operation and EME Exposure Limited Warranty Mobile Antenna InstallationControl Station Operation II. General Provisions Safety and Warranty III. HOW to GET Warranty Service Patent and Software Provisions VI. Governing LAW Accessories AudioMounting Antennas Control Station Receiving a Call Sending and Cancelling an Emergency AlertSending a Call Deleting a Nuisance Channel During Scanning Menu Navigation Chart Control