Introduction
Installation Troubleshooting Glossary License
You will need
Caution
This product is for indoor use only. Do not route the USB, Ethernet, or telephone cables outside of the building. Exposure of the cables to lightning could create a safety hazard and damage the product.
Precautions
Postpone VoIP cable modem installation until there is no risk of thunderstorm or lightning activity in the area.
To avoid damaging the VoIP cable modem with static electricity:
•
•
Always first connect the coaxial cable to the grounded cable TV wall outlet.
Before you connect or disconnect the USB or Ethernet cable from your VoIP cable modem or PC, always touch the coaxial cable connector on the VoIP cable modem to release any static charges.
To avoid damaging your VoIP cable modem or PC with static electricity:
Before you connect or disconnect the USB or Ethernet cable, touch the coaxial cable connector on the VoIP cable modem.
TEL 1
TEL 2
ETHERNET
USB
CABLE
+12VDC
Always make the wall connection first.
To prevent overheating the VoIP cable modem, do not block the ventilation holes.
Do not open the VoIP cable modem. Refer all service to your cable provider.
Wipe the VoIP cable modem with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit or use forced air to remove dust.
Caution
Contact your cable provider before connecting your VoIP cable modem to your existing telephone wiring. Do not connect the telephone wire to a traditional telephone (PSTN) service.
SBV5120 VoIP Cable Modem User Guide | 5 |
