WPS870G | User Guide |
|
|
7Browse the Database Volume and select where you want the NDPS Manager database to be assigned (for example, TECH_50_SYS.TeSupp in the window above).
8Click Create. The new NDPS Manager will appear in the main browser window.
Starting NDPS
To start the NDPS Manager, enter the following command at the console:
LOAD NDPSM
then select the NDPS Manager object.
To start the NDPS Manager whenever you bring up the server, add a command similar to the following to your server's AUTOEXEC.NCF file:
LOAD NDPSM SerMGR.TeSupp
The last item is the name of the NDPS Manager object you want to load.
After creating an NDPS Manager, you can create NDPS printers by using NetWare Administrator, as explained below.
Creating an NDPS Printer Agent
To create Public Access Printers using the NDPS Manager Object in NetWare Administrator, follow this procedure:
1Start the NDPS Manager object you will be using to control the Printer Agent.
2At the Identification page, click the Printer Agent List.
3Click New to display the Create Printer Agent window:
4Enter the desired name for the Printer Agent (PA) Name. Normally, the NDPS Manager will be the NDPS Manger object you are using.
5Select Novell Printer Gateway in the Gateway Type (see above).
6Click OK and then select the available printer.
PAGE 94
