![](/images/new-backgrounds/1104644/104644171x1.webp)
User Guide | WPS870G |
|
|
2
3On the Details tab, click Capture.
The Capture Printer Port window is displayed:
4Select the Device, normally LPT1 (parallel port 1). Enter or select the Path to the printer:
\\printer_name\P1
Where printer_name is the actual name of your printer. The printer_name is MOT appended with the last 7 digits of the device’s MAC address (see the MAC label on the bottom of your device).
For example:
\\MOT3000014\P1
Select Reconnect at logon. If this is not done, the capture setting will be lost when Windows is restarted.
Windows 2000/XP
1Login as Administrator.
2Open the command prompt window by selecting Start > Run and typing CMD in the Open field.
3Enter the following command:
net use lpt1 \\printer_name\P1 /persistent:yes
Where printer_name is the actual name of your printer. The printer_name is MOT appended with the last 7 digits of the device’s MAC address (see the MAC label on the bottom of your device).
For example:
net use lpt1 \\MOT3000014\P1 /persistent:yes and press Enter.
4To terminate this capture, use the following command at the command prompt: net use lpt1 /delete
and press Enter.
5Type exit to close the window.
PAGE 79