18
Player SetupEight Channel Audio Configuration
Setup Operations
Setup involves two parts. First, the overall configuration is chosen and any internal switches can be set as shown. Then the final levels
are set during playback later. These setup features are for the more advanced user. Most setup parameters can be done using the menus.
Configuration Options
The Player can be configured for audio and home theater
applications. We have listened to this product in the
most demanding audio systems and are confident that
you will not find a more neutral 2 channel CD/DAD/
DVD-Audio Player.
One time configuration is accomplished with user
settings inside the product.
Opening the Player
Place the Player upside down on a soft surface like a
tablecloth or carpet. Disconnect the power supply.
Remove the three philips screws on the front edge of
the cover. Turn the Player over and remove the three
philips screws from the back edge of the cover. Carefully
separate the base from the cover by sliding it toward the
front. Tip the cover forward and place with the front
down, right in front of the player. Take care not to
disconnect the ribbon cables to the front panel. Place
the Player so that the RCA connectors are facing AWAY
from you. This way all the diagrams will be oriented
correctly.
The photo shows the location of the switches and jumpers. The following diagrams and switch settings show what can be done.
First we show the standard factory settings in a stereo application. Notice that each output channel besides the fronts is comprised of the
source channels you select. In the standard settings, the center channel out is made from the center channel source as the third switch is
turned on. If you did not want a center but an extra sub channel, you could turn on the AUX-S switch #4.
A2 A1 S C LRRR LF RF
In In In In In In In In A2 A1 S C LRRR LF RF
Out OutOut Out OutOut Out Out
1
2
3
4on
L Main
Trim 6 dB cut
Low Pass
Filter
1
2
3
4on
1 R Main
2 R Rear
3 Aux C
4 Aux S
AUX. 1
R Main
Trim 6 dB cut
Low Pass
Filter
1
2
3
4on
1 R Main
2 L Main
3 Aux C
4 Aux S
AUX. S
6 dB cut
Low Pass
Filter
1
2
3
4on
1 R Main
2 L Main
3 Aux C
4 Aux S
AUX. C
6 dB cut
Low Pass
Filter
1 L Main
2 L Rear
3 Aux C
4 Aux S
AUX. 2
Stereo - Standard Configuration