POLE SAW TRIMMING PRECAUTIONS

1.Be aware of extension cord while operating chain saw. Be careful not to trip over cord. Keep cord away from chain and operator at all times.

2.Keep bystanders 50 feet (15 meters) away when oper- ating saw.

3.Do not use the pole saw to cut down trees. Use the chain saw without pole attachment.

4.Grip pole saw securely - one hand on the pole, the other on the handle.

5.Keep finger off trigger until ready to make cut.

6.Before starting pole saw, make sure chain is not touch- ing anything.

7.Keep all parts of body away from chain when saw is run- ning.

8.Do not force chain saw while cutting. Apply light pres- sure. It will do the job better and safer at the rate for which it was intended.

9.When cutting limbs or branches that are under tension, use extreme caution. Be alert for wood springing back. When wood tension is released, limb could spring back

and strike operator causing severe injury or death. 10.When Carrying pole saw from one place to another: •

unplug unit • return telescoping pole to shortest position

• hold pole at balance point (close to saw end) • keep guide bar and chain to rear

11.Do not cut small brush and saplings with the pole saw. Use the chain saw only, with extreme care. Slender matter may catch in the chain and be whipped toward you. This could also pull you off balance.

12.Never stand directly under the limb you are trimming. Always position yourself out of the path of falling debris. (See Fig. A)

13.Never stand on a ladder or other type of unstable sup- port while using the pole saw.

14.Always use both hands to operate pole saw. Keep a firm, steady pressure on the pole saw while cutting but do not try to force the saw through the wood.

15.Do not use the pole saw to cut limbs larger in diameter than 4” (10 cm) in diameter. (See Fig.B)

16.Keep other persons away from cutting end of pole saw and at a safe distance from work area. (See Fig. C)

17.Do not use pole saw near cable, electric power or tele- phone lines. Maintain a minimum clearance of 10 feet from all power lines. (See Fig.D)

Fig.B

Fig.C

Fig.D

SAVE THESE

INSTRUCTIONS

Fig.A

9

Page 9 Page 11
Page 10
Image 10
MTD PS manual Save These Instructions, Pole SAW Trimming Precautions
Page 9 Page 11

PS specifications

MTD PS, or Machine Translation Deep Post-Editing System, is an innovative solution designed to improve the accuracy and quality of machine-generated translations. This system is particularly instrumental for businesses and organizations that rely on multilingual communication and require high-quality translations for documents, websites, and other materials.

One of the main features of MTD PS is its deep learning architecture, which employs neural networks to analyze and refine machine-generated translations. This technology allows the system to understand linguistic nuances, context, and semantics, resulting in translations that are not only grammatically correct but also culturally relevant. The adaptability of deep learning means that the system can continuously improve over time by learning from user feedback and various language data.

Another significant characteristic of MTD PS is its user-friendly interface. Designed with usability in mind, the system allows post-editors to review and enhance translations with ease. Suggestions for improvements are generated in real-time, enabling human translators to make quick decisions and apply necessary changes. This collaboration between humans and machines amplifies productivity while maintaining high standards of quality.

MTD PS integrates advanced natural language processing (NLP) technologies, which are crucial for understanding and generating human-like text. With features such as context-aware formatting and terminology management, the system ensures consistency across different translations, streamlining the localization process. NLP capabilities also facilitate the handling of idiomatic expressions and jargon specific to certain fields, enabling the system to cater to various industries.

Additionally, MTD PS is equipped with extensive data analytics features. It allows users to track performance metrics such as translation accuracy and editor efficiency. This data-driven approach helps organizations evaluate the effectiveness of their translation processes and make informed decisions about future localization strategies.

In summary, MTD PS is a powerful tool that leverages deep learning, NLP technologies, and user-centric design to enhance the quality of machine translations. Its ability to adapt, learn, and provide actionable insights makes it an invaluable asset for a wide range of applications in the global marketplace. As businesses continue to expand their reach across borders, systems like MTD PS will play a pivotal role in ensuring effective communication and fostering collaboration across cultures.
Top Page Image Contents