RULES FOR SAFE OPERATION

•Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw’s chain stops moving when the throttle control trigger is released.

•Shut off the motor before setting the chain saw down.

•Use extreme caution when cutting small-sized brush and saplings because slender material may catch the chain saw and whip towards you or pull you off balance.

•When cutting a limb that is under tension, be alert for springback so that you will not be struck when the ten- sion in the wood fibers is released

•Do not cut through nails, rods in the tree, railroad ties or pallets. Inspect a tree that you are going to cut for for- eign objects that could cause injury or damage to your chain saw.

•After striking a foreign object, stop the engine and thor- oughly inspect for damage. Repair as necessary.

•Keep the handles dry, clean and free of the oil/fuel mix- ture

•We do not recommend using the chain saw in a tree or on a ladder.

•All chain saw service, other that the items listed in this instruction manual maintenance instructions, should be performed by competent chain saw service personnel.

•Use the right tool. Only use this chain saw for its intend- ed purpose, to cut wood.

•Do not overreach. Always keep proper footing and bal- ance.

•Always hold the unit with both hands when operating. Keep a firm grip on all handles or grips.

•Never touch the chain or attempt to service the saw while the engine is running. Make sure all moving parts have stopped. Allow the chain saw to cool, as the chain can be hot.

•Check the bar and chain at frequent intervals for proper adjustment. Make sure the bar and chain are properly tightened and sharpened. Visually inspect for damage. Repair any damage before restarting or operating the chain saw.

KICKBACK SAFETY PRECAUTIONS

KICKBACK may occur

WARNING: when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a light- ning-fast reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back toward the oper- ator. Either of these reactions may cause you to lose control of the saw, which could result in seri- ous personal injury.

Do not rely exclusively upon the safety devices built into your saw. As a chain saw user, you should take several steps to keep your cutting jobs free from accident or injury.

•With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents. Be alert to the potential for kick- back at all times.

•Keep a good firm grip on the pole saw with both hands, the right hand on the handle and the left hand confortably on the pole lower when the motor is running. A firm grip will help you reduce kickback and maintain control of the saw. Don’t let go.

•Make sure that the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, fence, or any other obstruction that could be hit while you are operating the saw.

•Always cut with the motor running at full speed. Fully squeeze the throttle trigger and maintain a steady cutting speed.

•Use only the correct original equipment manufacturer replacement bars, chains and other parts and acces- sories. These are available from your authorized service dealer. Use of any unauthorized parts or accessories could lead to serious injury to the user, or damage to the unit, and will void your warranty.

•Follow the manufacturer’s sharpening and maintenance instructions for the saw chain.

•Use only the replacement guide bars and low kickback chains specified for your saw to avoid injury.

3

Page 3 Page 5
Page 4
Image 4
MTD PS manual Kickback Safety Precautions
Page 3 Page 5

PS specifications

MTD PS, or Machine Translation Deep Post-Editing System, is an innovative solution designed to improve the accuracy and quality of machine-generated translations. This system is particularly instrumental for businesses and organizations that rely on multilingual communication and require high-quality translations for documents, websites, and other materials.

One of the main features of MTD PS is its deep learning architecture, which employs neural networks to analyze and refine machine-generated translations. This technology allows the system to understand linguistic nuances, context, and semantics, resulting in translations that are not only grammatically correct but also culturally relevant. The adaptability of deep learning means that the system can continuously improve over time by learning from user feedback and various language data.

Another significant characteristic of MTD PS is its user-friendly interface. Designed with usability in mind, the system allows post-editors to review and enhance translations with ease. Suggestions for improvements are generated in real-time, enabling human translators to make quick decisions and apply necessary changes. This collaboration between humans and machines amplifies productivity while maintaining high standards of quality.

MTD PS integrates advanced natural language processing (NLP) technologies, which are crucial for understanding and generating human-like text. With features such as context-aware formatting and terminology management, the system ensures consistency across different translations, streamlining the localization process. NLP capabilities also facilitate the handling of idiomatic expressions and jargon specific to certain fields, enabling the system to cater to various industries.

Additionally, MTD PS is equipped with extensive data analytics features. It allows users to track performance metrics such as translation accuracy and editor efficiency. This data-driven approach helps organizations evaluate the effectiveness of their translation processes and make informed decisions about future localization strategies.

In summary, MTD PS is a powerful tool that leverages deep learning, NLP technologies, and user-centric design to enhance the quality of machine translations. Its ability to adapt, learn, and provide actionable insights makes it an invaluable asset for a wide range of applications in the global marketplace. As businesses continue to expand their reach across borders, systems like MTD PS will play a pivotal role in ensuring effective communication and fostering collaboration across cultures.
Top Page Image Contents