OPERATING INSTRUCTIONS

CHAIN AND BAR LUBRICATION

Always check oil level before using saw. To oil chain, press oil cap. Do not attempt to operate the oiler while cutting with the saw. Oil will feed onto guide bar and chain. Press oil cap at least once before each cut. Check oil level often by looking at oil sight level hole. Oil sight level hole is on left side of saw, between front handle and front hand guard.

A cord that is hot to the

CAUTION: touch is overloaded.

1.When using the appliance, an extension cord of ade- quate size must be used for safety and to prevent loss of power and overheating.

2.The extension cord must be specifically intended for out- door use and marked SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTOW-A, STJW, or SJTW.

Never starve the bar and CAUTION: chain of lubrication oil.

Running the saw DRY or with TOO LITTLE OIL will decrease cutting effi- ciency, shorten chain saw life, and cause rapid dulling of the chain and excessive wear of the bar from overheating. Too little is evidenced by smoke or bar discoloration.

NOTE: The saw chain stretches during use, particularly when it is new, and occasional adjustment will be needed. A new chain requires more frequent adjustment during the break-in period. This is normal. See Page 10 for Saw Chain Tension Adjustment instructions.

WARNING/ A loose chain can jump off the bar while you are

CAUTION: cutting, as well as wear the bar and chain. A

chain that is too tight can damage the saw. Either situation, chain too loose or too tight, could cause serious personal injury.

EXTENSION CORDS

When using an electric chain saw, plug it into the extension cord only when you are ready to cut wood. Connect the extension cord to a 110/120 voltage outlet.

NOTE: To prevent disconnection of the extension cord, tie a loose knot before connecting the ends together (Figure 15).

3.Inspect the extension power cord for loose or exposed wires and damaged insulation. If damaged, replace before using the appliance.

DOUBLE INSULATION

Do not operate your

WARNING: chain saw in a wet or damp environment. Do

not expose the saw to rain, snow or sleet. Moisture will cause short circuits. Replace or repair any damaged or frayed extension cords before using your saw.

Keep the cord away from the cutting area and position the cord so that it will not be caught on branches or other objects during cutting.

NO SERVICEABLE PARTS INSIDE

Do not use if the cord or plug is damaged. Your appliance is double insulated to help protect against electric shock. Double insulation construction consists of 2 separate “lay- ers” of electrical insulation.

Appliances built with this insulation system are not intend- ed to be grounded. As a result, the extension cord used with your appliance can be plugged into any conventional 120 volt electrical outlet.

Normal safety precautions must be observed when operat- ing an electrical appliance. The double insulation system is only for added protection against injury resulting from a pos- sible internal electrical insulation failure.

Your double insulated WARNING: appliance has no serv- iceable parts inside. Do

not attempt to repair it yourself. For service information, contact the MTD Product Service Department toll-free number listed on the back cover of this manual.

Fig.15

14

Page 14 Page 16
Page 15
Image 15
MTD PS manual Chain and BAR Lubrication, Extension Cords, Double Insulation, No Serviceable Parts Inside
Page 14 Page 16

PS specifications

MTD PS, or Machine Translation Deep Post-Editing System, is an innovative solution designed to improve the accuracy and quality of machine-generated translations. This system is particularly instrumental for businesses and organizations that rely on multilingual communication and require high-quality translations for documents, websites, and other materials.

One of the main features of MTD PS is its deep learning architecture, which employs neural networks to analyze and refine machine-generated translations. This technology allows the system to understand linguistic nuances, context, and semantics, resulting in translations that are not only grammatically correct but also culturally relevant. The adaptability of deep learning means that the system can continuously improve over time by learning from user feedback and various language data.

Another significant characteristic of MTD PS is its user-friendly interface. Designed with usability in mind, the system allows post-editors to review and enhance translations with ease. Suggestions for improvements are generated in real-time, enabling human translators to make quick decisions and apply necessary changes. This collaboration between humans and machines amplifies productivity while maintaining high standards of quality.

MTD PS integrates advanced natural language processing (NLP) technologies, which are crucial for understanding and generating human-like text. With features such as context-aware formatting and terminology management, the system ensures consistency across different translations, streamlining the localization process. NLP capabilities also facilitate the handling of idiomatic expressions and jargon specific to certain fields, enabling the system to cater to various industries.

Additionally, MTD PS is equipped with extensive data analytics features. It allows users to track performance metrics such as translation accuracy and editor efficiency. This data-driven approach helps organizations evaluate the effectiveness of their translation processes and make informed decisions about future localization strategies.

In summary, MTD PS is a powerful tool that leverages deep learning, NLP technologies, and user-centric design to enhance the quality of machine translations. Its ability to adapt, learn, and provide actionable insights makes it an invaluable asset for a wide range of applications in the global marketplace. As businesses continue to expand their reach across borders, systems like MTD PS will play a pivotal role in ensuring effective communication and fostering collaboration across cultures.
Top Page Image Contents