Multi-Tech Systems BL-Series manual $Hn, L10, #Ln, $MBn, 134

MultiModemBL User Guide

Command	Values	Description
$Hn	n = 1 thru 3	$H1 brings up Help Screen #1.
		$H2 brings up Help Screen #2.
		$H3 brings up Help Screen #3.
In	n = 0,1or 2	I0 requests modem ID #.
		I1 requests firmware revision #.
		I2 for MTS internal use.
I9 (2834 Series only)	Read Only	Command enables display of Windows 95
		Autodetect characteristics
L		Lists all stored telephone numbers in memory.
L5		L5 lists all current operating parameters.
L6		L6 lists all current S-Register values.
L7		L7 lists additional parameters.
L8		L8 lists On-Line Diagnostics.
L9		L9 Displays Signal Strength Information.
L10		L10 Displays Signal to Noise Ratio Information.
L11		L11 Displays Noise Information.
#Ln	n = 0 thru 3	* #L0 means modems negotiate V.42 Mode.
		#L1 means MNP on and LAP-M off.
		#L2 means LAP-M on and MNP off.
		#L3 means no detection phase but go directly to
		LAP-M.
Mn	n = 0 thru 3	M0 means Monitor speaker always Off.
		* M1 means Monitor speaker On until carrier detected
		M2 means Monitor speaker always On.
		M3 Monitor speaker on during dialing/off during
		handshaking.
$MBn	n = speed	2834 Series:
		$MB75 selects CCITT V.23 mode.
		$MB300 selects 300 bps on-line.
		$MB1200 selects 1200 bps on-line.
		$MB2400 selects 2400 bps on-line.
		$MB4800 selects 4800 bps on-line.
		$MB9600 selects 9600 bps on-line.
		$MB14400 selects 14400 bps on-line
		$MB19200 selects 19200 bps on-line
		$MB28800 selects 28800 bps on-line
		* $MB33600 selects 33600 bps on-line
		1932 Series:
		$MB75 selects CCITT V.23 mode.
		$MB300 selects 300 bps on-line.
		$MB1200 selects 1200 bps on-line.
		$MB2400 selects 2400 bps on-line.
		$MB4800 selects 4800 bps on-line.
		$MB9600 selects 9600 bps on-line.
		$MB14400 selects 14400 bps on-line
		* $MB19200 selects 19200 bps on-line

* Factory Default Setting

134