Multi-Tech Systems BL-Series manual Is Your Modem Ready for Use?

MultiModemBL User Guide

15Click Next Dialog. The Phone Numbers and Prefixes dialog is displayed.

16Follow the on-screen instructions and when you are finished, click Next Dialog. The following dialog is displayed:

17 Click OK, Exit the Installation Program. The Trio Applications program group is displayed.

Your Trio software is loaded. If you wish to begin using Trio right away, double click on the Trio DataFax Voice icon. Refer to the Release Notes for instructions.

To quit Trio altogether, close the Trio Applications program group, and then click the Exit () icon on the installation screen to exit the installation program.

2.4Is Your Modem Ready for Use?

As soon as you have connected power to the modem, if you are an experienced modem user, you may simply want to check your modem’s settings for data compression, error correction, and so on. You may find that you can get moving quite quickly if you just issue an ATL5, ATL6 and an ATL7 command. These commands list how your modem is currently configured. If you come across a setting you’re unsure of, refer to Chapter 5 and Chapter 6 for AT command and S-Register explanations and defaults.

If you’re a novice, refer to Chapter 3 to learn about the basics of data communications.

26