Multi-Tech Systems Hub manual Powering Up, Power Supply Connectors

Chapter 2 - Installing Your CommPlete 4000

Powering Up

Note: This is pluggable equipment; the socket outlet must be installed near the equipment and must be easily accessible.

Make sure that the voltage selector on the power supply is set to the proper voltage prior to connecting this equipment to the main power. If the voltage selector needs to be changed, an ordinary pencil can be used to change the switch to the position which best correlates with the known input voltage. If the voltage selector is in the "115" position, input voltages from 100-120VAC may be applied to the equipment. If the voltage selector is in the "230" position, input voltages from 200-240 VAC may be applied to the equipment.

Connect the power cord supplied with the CommPlete 4000 to the power cord connector on the back of the cabinet and to an AC outlet. Press the power switch on the front of the cabinet to the ON position. The power switch contains an LED which should light when power is applied.

120

Power Supply

Monitor Power

Outlet

120

Power Cord

Input

Voltage Selector

Fig. 2-4. Power Supply Connectors

12 CommPlete 4000 Communications Server User Guide