Multi-Tech Systems MT3334HD8 manual Command Values Description $MBn

MT3334HD8 User Guide

Command	Values		Description
$MBn	n = speed		Modem Baud Rate
			$MB75		Select ITU-T V.23 mode.
			$MB300 Select 300 bps on line.
			$MB1200 Select 1200 bps on line.
			$MB2400 Select 2400 bps on line.
			$MB4800 Select 4800 bps on line.
			$MB7200 Select 7200 bps on line.
			$MB9600 Select 9600 bps on line.
			$MB12000 Select 12,000 bps on line.
			$MB14400 Select 14,400 bps on line.
			$MB16800 Select 16,800 bps on line.
			$MB19200 Select 19,200 bps on line.
			$MB28800 Select 28,800 bps on line.
		*** $MB33600 Select 33,600 bps on line.
Nd	d = 0 or 1		Dial a Stored Number
			Dial stored telephone number d.
NdNe...	d = 0 or 1		Number Linking
	e = 1 or 0		Dial stored number d; if that is busy, dial stored
			number e. The command may be extended
			NdNeNdNe... to cycle between the two numbers.
O	n/a		Go Back On Line
			Exit command mode and go into online mode after
			using the escape code to do the reverse.
P	In dialing	***	Pulse-Dial
	command		Modem pulse-dials numbers that follow P.
&Pn	n = 0 or 1		Set Pulse Dial Ratios
		***	&P0	60:40 pulse ratio.
			&P1	67:33 pulse ratio.
			Note: The ZDXK is locked to &P1, a 67:33 ratio.
Qn	n = 0–2		Result Codes Enable/Disable
		***	Q0	Result codes sent.
			Q1 Result codes suppressed (quiet).
			Q2 No Response answer mode.
&Qn	n = 0 or 1		Result Codes (Multi-Tech or Standard AT)
		***	&Q0	Multi-Tech responses with modifiers.
			&Q1	Standard AT responses with no modifiers.
Rn	n = 0 or 1		Reverse Originate/Answer Mode
		*** R0		Modem will not reverse modes.

R1 Modem will reverse modes when R is added to dial string.

80 CommPlete Communications Server