Multi-Tech Systems MT3334HD8 manual Breakatcr

MT3334HD8 User Guide

Command	Values	Description
;	At end of dial	Return to Command Mode After Dialing
	command	Semi-colon; causes immediate return to command
		mode after dialing.
!	In dial	Flash On-Hook
	command	Exclamation; causes modem to flash on-hook.
@	In dial	Quiet Answer
	command	Causes modem to wait for a ringback, then 5 seconds
		of silence before processing next part of command.
$	In dial	Call Card Tone Detect
	command	Causes modem to wait for a call card tone before
		processing next part of command.
+++AT<CR>		Escape Sequence
		Puts modem in command mode while still remaining
		on line. Type +++ followed by the letters A and T, up
		to ten command characters (or as defined by S34),
		and a RETURN.
<BREAK>AT<CR>		Break Escape Sequence
		Alternate escape method. Puts modem in command
		mode while still remaining on line. Enter break signal
		followed by the letters A and T, up to sixty command
		characters, and a RETURN.
%%%AT<CR>		Remote Configuration Escape Sequence
		Cause remote modem to display remote configuration
		menu. Type %%% (or as defined in register S13)
		followed by the letters A and T, and a RETURN.

*Factory default on International model

**Not available on U.K. model

***Factory default on North American model

84 CommPlete Communications Server