Multi-Tech Systems MT5634SMI V.34, MT5634SMI V.92 manual 135, Parity, setting

Index

Page Transfer Status - +FPS	82
Page Width Format Conversion - +FWDFC	90
Parameter Commands	72
parity, setting	20, 27
Pause time for comma - S8, setting	28
PCM Upstream Ignore command - +PIG=	23
Phase C Data Format - +FBO	87
Phase C Received EOL Alignment - +FEA	87
polling	65
Post Page Message Response - +FET	69
Post-Page Message Release command	62
Produce DTMF and Tone Generation in Voice Mode
command +VTS=	108
Protocol Result Code command - \V	16
Pulse Dial Make-to-Break Ratio Selection command - &P
......................................................................................	13
Pulse Dialing command - P	10
Q
Quick Connect	25
Quick Connect Control command - +PQC=	25
R
Rate S37, maximum data	29
Read Register Value command Sr?	11
Receive Page Transfer Status response - +FPS	68
Receive Quality Thresholds - +FRQ	84
Remote configuration	129
Escape character	129
Escape character - S9	28
Remote Escape AT Command	21
Remote escape character, changing	129
Remote ID Responses - +FTI, +FCI, +FPI	66
remote IDs	66
Remote Polling Indication Response - +FPO	65
Repeat Last command - A/	8
Report Addressing or Password Strings Responses - +FSA,
+FPA, +FPW	67
Report DIS/DCS/DTC Frame Information responses -
+FCS, +FIS, +FTC	65
Report Event Reporting and Masking Capabilities
command - +VEM=?	118
Report Frequency Support command - +VTS=?	109
Report Manufacturer’s ID command - +FMI?	107
Report Modem Flow Control Assert and Deassert Points
command - +VBT=?	119
Report Non-Standard Negotiation Frames responses -,
+FNF, +FNS, +FNC	66
Report Product ID command - +FMM?	107
Report Received HDLC Frames response	93
Report Remote ID responses	66
Report Transmit HDLC Frames response	93
Report Version Level command - +FMR?	107
Report Voice Compression Method command - +VSM=?
....................................................................................	115
Request Manufacturer ID - +FMI	60
Request Manufacturer Identification command	60
Request Model ID - +FMM?	60
Request Model Identification command	60
Request Revision ID - +FMR?	60
Request Revision Identification command	60
Request to Poll - +FSP	78
Resetting the modem	11, 12
responses	64
Result Code Format command - V	11
Result Code Options command - W	11

Result Code Selection command - X		11
Result codes		5
Result Codes		31
Result Codes Enable/Disable command - Q		10
Return Online to Data Mode command - O		10
Ring Priority vs. AT Command Priority Command $RP . 18
Rings counted - S1		28
Rings S0, setting number of		28
ROM Checksum		10
S
Select Analog Source/Destination command - +VLS= ..		111
Select Default Beep Tone Duration Timer (DTMF/Tone
Generation Duration) command +VTD=		115
Select DTE/DCE Interface Rate (Turn Off Autobaud)
command - +VPR=		120
select Fax Class 1 command - +FCLASS=1		37
select Fax Class 1.0 command - +FCLASS=1.0		37
Select Flow Control Method command - +FLO=		107
Select Maximum MNP Block Size command - \A		14
Select Modem Operating Mode command +FCLASS= . 105
Select Stored Configuration command &W		14
Select Voice Compression Method command +VSM=..		114
Serial Port Baud Rate command - $SB		18
Service Class Available - +FCLASS		59
Service Class Capabilities command		59
Service Class Selection - +FCLASS=<value>		60
Service Class Selection command		60
Session Message Report Responses		93
Session Message Reporting - +FBU		79
Session Termination - +FKS		63
Session Termination command		63
Set 11-bit Parity command - #P	20, 27
Set Current Time & Date		91
Set DTE/DCE Inactivity Timer command - VIT=		110
Set Modem Flow Control Assert and Deassert Points
command - +VBT=		119
Set Register Value command - Sr=		11
Set Ring Back Goes Away Timer command - VRA= ....		112
Set Ring Back Never Appeared Timer command - +VRN=
...................................................................................		112
Set Silence Detection Sensitivity command +VSD=		113
Set the Gain for Received Voice Samples command -
+VGR=		110
Set the Volume for Transmitted Voice Samples command -
+VGT=		110
Setup password		129
Setup password, changing		129
sleep mode S89		30
Speaker Mode command		10
Speed
Maximum S37		29
Speed conversion (data buffer)		13
S-registers
S2 – Escape Sequence		28
S-Registers		28
reading		11
S0 – Sets Number of Rings		28
S1 – Counts Rings		28
S10 – Carrier Loss Disconnect Time		28
S108 – 56K Operation Digital Loss		30
S11 – Dialing Tones		28
S28 – V.34 Modulation		28
S3 – Carriage Return		28
S30 – Inactivity Timer		28
S35 – V.25 Calling Tone		28
S36 – Error Control		28

Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 135