Multi-Tech Systems MT5634SMI V.92, MT5634SMI V.34 manual +Fns, +Flpl, +Fspl

Chapter 3 – Fax Class 2 Commands

Non-standard Frame FIF Octet String

Class 2.1	+FNS
Write syntax:	+FNS="< hexadecimal-coded octet string>"
Values:	up to 90 octets
Default:	Null String
	If +FNS is not a Null String, the modem sends the corresponding non-standard
	facilities frame. The type of frame is determined by the type of negotiation frame to
	be sent: NSF sent with DIS; NSS sent with DCS; NSC sent with DTC.
	The modem only delivers the data; the host must determine the content. The first
	octet must be the country code (see Recommendation T.35).
Class 2	There is no equivalent parameter in Class 2.
Indicate Document to Poll
Class 2.1	+FLP
Write syntax:	+FLP=<value>
Values:	0, 1
Default:	0
	+FLP=0	The host has no document to poll.
	+FLP=1	The host has a document ready for polling. The modem reports this to the
		remote station in the DIS frame. The modem resets this parameter to 0
		after a polled document is sent.
Class 2	+FLPL
Write syntax:	+FLPL=<value>
Values:	0, 1
Default:	0
	The Class 2 parameter is the same as the Class 2.1 parameter except for the name.

Request to Poll

Class 2.1	+FSP
Write syntax:	+FSP=<value>
Values:	0, 1
Default:	0
	+FSP=0	The host does not want to poll.
	+FSP=1	The host can receive a polled document. The modem resets this parameter
		to 0 after a polled document is received.
Class 2	+FSPL
Write syntax:	+FSPL=<value>
Values:	0, 1
Default:	0
	The Class 2 parameter is the same as the Class 2.1 parameter except for the name.

Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 78