Multi-Tech Systems MT5634SMI V.92, MT5634SMI V.34 manual #Cbf?

		Chapter 1 – AT Commands, S-Registers and Result Codes
Command:	#CBAn	Callback Attempts
Values:		n = 1–255
Default:		4
Description:		Sets the number of callback attempts that are allowed after passwords have
		been exchanged between modems.
Command:	#CBDn	Callback Delay
Values:		n = 0–255
Default:		15
Description:		Sets the length of time (in seconds) that the modem waits before calling back
		the remote modem.
Command:	#CBF?	Callback Failed Attempts Display
Values:		N/A
Default:		N/A -
Description:		Requests the number of failed callback passwords since reset or power-up.
		This number can be stored to nonvolatile memory using the &W command.
Command:	#CBFR	Callback Failed Attempts Reset
Values:		N/A
Default:		N/A
Description:		Resets the number of failed callback passwords to 0. This does not reset the
		number stored in nonvolatile memory.
Command:	#CBIn	Local Callback Inactivity Timer
Values:		n = 1–255
Default:		20
Description:		Sets the time (in minutes) that the modem waits for a command before
		forcing the user to enter the setup password again.
Command:	#CBNy=x	Store Callback Password
Values:		y = 0–29
		x = password
Defaults:		None
Description:		Sets the callback security password for the y memory location. The password
		must have 6 to 10 characters, and cannot include the + or - characters.
Command:	#CBPn	Callback Parity
Values:		n = 0, 1, or 2
Default:		0
Description:		Sets parity for the callback security messages.
		#CBP0 No parity.
		#CBP1 Odd parity.
		#CBP2 Even parity.
Command:	#CBRy	Callback Security Reset
Values:		y = 0–29
Default:		None
Description:		Clears the password and phone number in the y memory location.

Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 26