Multi-Tech Systems MT5634SMI V.92, MT5634SMI V.34 manual AT+FCLASS=2.0

Chapter 3 – Fax Class 2 Commands

Send two pages, 1-D data, no errors (Class 2.0)

Square bracketed [ ] responses are conditional on the remote station actions; curly bracketed { } responses are conditional on switches set by the host. For this example, all reports are enabled: +FNR=1,1,1,1.

Square bracketed [ ] commas are optional for the host.

Host Commands	Modem	Local Modem	Remote	Notes
	Responses	Action	Station
			Action
AT+FCLASS=2.0	OK	Set Class 2
[AT+FPW="<sending	OK	Set local PWD		host may load a
password string>"]				Password
[AT+FSA="<SUB	OK	Set SUB		Host may load a
string>"]				destination SUBaddress
[AT+FLI="<local ID>"]	OK	Set local ID		host may load a
				local ID
ATD<dial string>		off hook, dial,	answer,
	+FCO	send CNG	send [CED],
		detect flags	preamble,
	[+FNF:<nsf>]	[get NSF]	[NSF,]
	[+FCI:"<csi>"]	[get CSI]	[CSI,]
	{+FIS:<dis	get DIS	DIS
	codes>}
	OK
[AT+FNS="<hex NSS	OK			host may respond to
FIF string>"]				NSF frame
AT+FDT		[send NSS,]	[get NSS,]	if +FNS loaded
		[send PWD,]	[get PWD,]	if +FPW loaded
		[send SUB,]	[get SUB,]	if +FSA loaded
	{+FCS:<codes>	[send TSI,]	[get TSI,]	if +FLI loaded
		send DCS	get DCS
<1st page data>	}	send TCF	get TCF
	CONNECT	get CFR	send CFR
<RTC pattern>		send carrier	get carrier
<DLE><mps>		send page data	get data
	OK	send RTC	get RTC
		send MPS	get MPS
		get MCF	send MCF
AT+FDT	CONNECT	send carrier	receive
<2nd page data>
		send 2nd page	carrier
<RTC pattern>		send RTC	get 2nd page
<DLE><eop>		send EOP	get RTC
	+FHS:00	get MCF	get EOP
		send DCN	send MCF
	OK	hang-up	get DCN
			hang-up

Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 96