Multi-Tech Systems MT5634SMI V.92 Service Class Selection, Request Manufacturer Identification

Chapter 3 – Fax Class 2 Commands

Service Class Selection

Class 2.1 +FCLASS=<value>

The Service Class may be set by the host from the above choices using the +FCLASS=<value> command. Once the result code is received from the modem.

Class 2 +FCLASS=<value>

Same as Class 2, except for the +FPR command. In Class 2, the serial port rate is set by the speed at which the dial command is given when originating a fax call, the speed at which the answer command is given when manually answering a fax call, or the speed at which the last command is received before automatically answering the call.

Request Manufacturer Identification

Class 2.1	+FMI?
	The +FMI? command executes the V.25ter +GMI? command to request the name of
	the modem’s manufacturer.
	Example: AT+FMI?
	Multi-Tech Systems
	OK

Class 2	+FMFR?
	The +FMFR? command requests the name of the modem’s manufacturer.

Request Model Identification

Class 2.1	+FMM?
	The +FMM? command executes the V.25ter +GMM? command to request the
	modem’s model number.
	Example: AT+FMM?
	MT5634ZBA-V92
	OK

Class 2	+FMDL?
	The +FMDL? command requests the modem’s model number.

Request Revision Identification

Class 2.1	+FMR?
	The +FMR? command executes the V.25ter +GMR? command to request the
	modem’s firmware revision number.
	Example: AT+FMI?
	------------
	OK
Class 2	+FREV?
	The +FREV? command requests the modem’s model number.

Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C) 60