Multiplex Technology 4CH, 8CH Advance Menu Remote, Device, Protocol, PTZ Connection and Control

4.10 ADVANCE MENU ___REMOTE

Move the cursor to “REMOTE”, and press ”ENTER”, then the screen will show the following options.

	Take 16CH as an example			REMOTE
	TITLE	DEVICE	ID	PROTOCOL	RATE
01		PTZ	001	P - D	02400
02		CAMERA	002	NORMAL	02400
03		CAMERA	003	NORMAL	02400
04		CAMERA	004	NORMAL	02400
05		CAMERA	005	NORMAL	02400
06		CAMERA	006	NORMAL	02400
07		CAMERA	007	NORMAL	02400
08		CAMERA	008	NORMAL	02400
	PREV	NEXT

1)TITLE:

Title of each camera.

2)DEVICE:

Select to control normal camera or PTZ camera for each channel.

3)ID:

Set the ID number (0 ~ 255) of PTZ camera.

Note: After connect to PTZ correctly, the default ID of PTZ will be shown on the screen.

Note: Please refer to below instruction “PTZ Connection and Control”.

4)PROTOCOL:

Select NORMAL (our protocol) or PELCO-D protocol.

5)RATE:

Set the baud rate of each channel (2400, 4800, 9600, 19200, 57600).

***PTZ Connection and Control: ***

1)Device: Our own brand PTZ / Pelco-D protocol PTZ

2)Connection: Detailed connection and instructions, please refer to PTZ manual.

Note:

As for “RS485A and RS485B Port” please refer to “Section 1.5 Rear Panel”, or refer to “Appendix #2 PIN Configuration”.

3)Control Mode: Refer to front panel / Refer to IR remote control manual.

23