37
Press “System Config ” button to enter the system setting page.
NetworkNetwork
c
cStatic IP:
Static IP:
Enter the “server IP”, “gateway”,
“net mask” and “web port”, then
press “APPLY” to confirm.
d
dPPPoE
PPPoE:
:
Enter the “username” and
“password” provided by your ISP
(Internet Sever ) supplier, then
press “APPLY” to confirm.
e
eDHCP:
DHCP:
This DHCP function need to be
supported by router or cable
modem network with DHCP
service. Choose the DHCP IP type
and press “APPLY” to confirm.
***Note***:
***Note***:
PPPoE and DHCP network
connection type will require to
apply DDNS service
DDNS service to get a
“Hostname
Hostname” to correspond to
dynamic IP address.
Please refer to P.38 for details.
***Note***:
***Note***:
Some router brand may need to
restart the DVR to get the IP
address.
f
fWeb Port:
Web Port:
The DVR can be viewed over the
network with software AP or a web
browser. Typically the TCP port
used by HTTP is 80. However in
some cases it is better to change
this port number for added
flexibility or security. Valid number
is 80 ~ 19999.
60.121.46.236
The network configuration allows DVR
to be available for Ethernet network or
dial-up.
3)
3) Advanced Setting
Advanced Setting: