Detection
Take 16CH as an example
cSelect the desired channel, and press “Edit” to enter the motion detection sensitivity and area setting box.
dMotion Detection Sensitivity: Set the detection sensitivity in 4 different adjustable factors.
LS: The sensitivity of comparing two different images. The smaller the value is, the higher sensitivity for motion detection.
SS: The sensitivity towards the size of the triggered object on the screen (the number of motion detection grids). The smaller the value is, the higher sensitivity for motion detection. TS: The sensitivity towards how long the object gets triggered. The smaller the value is, the higher sensitivity for motion detection.
RE: The value of RE is a reference for detection. The bigger the value is, the higher sensitivity for motion detection.
e | Alarm: | 60.121.46.236 |
Select LOW / HIGH for the alarm polarity.
f Motion Detection Area: |
|
| ||
| Clicking the area by PC | mouse, |
|
|
one can choose the motion area to | Note: Enable the motion detection function. | |||
be detected. The | When the motion is triggered, | |||
area is in transparent picture while | a “ | ” icon will shown on the | ||
the undetected area is in pink color. | screen. And software AP will start | |||
*Click the “Select All” to clean the | recording automatically. | |||
previously selected detection area. |
|
| ||
*Click the “Clear All” to activate the detection area as full area.
g After setting, press “OK” and then press “APPLY” to confirm.
41
